12-03-2009 09:46 AM
Can't print both sides since changing to Win 7.
Printer works fine otherwise.
Connected to router as network printer.
Can't find in driver where to "print both sides", like I previously did.
Am using this driver: upd-5_0_1-plc6_winxp-vista-X64.exe.
12-03-2009 01:50 PM
Did you install the UPD driver in traditional or dynamic mode? Traditional mode is where you get a dedicated instance of the driver in Devices and Printers. It would show up as HP Universal Printing PCL6 (v5.0). If installed in traditional mode the driver has the print on both sides option under the finishing tab and appears to work fine. If you did install in traditional mode, open the printer driver properties and choose the Device Settings tab. Find the heading labeled Installable Options, then locate Duplex Unit (for 2-sided printing) and see it if reports as installed. If not change the setting to installed and then apply the setting. If you installed in Dynamic Mode I would suggest removing the driver and reinstall using Traditional Mode.
01-03-2012 10:28 AM
I have been using the HP Color Laserjet 2605/2605 dn/2605 dtn PS driver on Windows 7 (64 bit) machine via a router. Should I be using the generic driver? Where can I get it? I am trying to get it to duplex.
11-25-2014 03:27 AM
no you should use the generic driver. This doesn't support double sided. You need to download the PCL6 driver which is a HP universal driver that supports double sided.
- HP Printers - Using HP Diagnostic Tools for HP Printers in Windows
- HP Printers - After Windows 10 Upgrade, Printer Does Not Print
- HP Printers - Using Google Cloud Print with Your HP Printer
- HP Printers - Printer is Offline (Windows)
- HP LaserJet Pro Printers and Multifunction Printers - HP Smart Install Discontinuation