03-23-2012 12:46 PM
Laserjet 2550L being used with Mac OSX Lion 10.7.3. After turning on, it will print once. When trying to print a second time I get a message "waiting for printer to become available." I have to turn it off and then back on to get it to print again.
03-29-2012 11:31 AM
Hey there caboodle. As far as I can tell, the LaserJet 2550L is not supported with Lion (10.7). I do know there was a similar issue in 10.6 that had a "work-around." You can try this and see how it works for you in 10.7:
Using Mac's Finder, go into System folder, then Library folder, then Extensions and then move hp_Laserjet_io_enabler.kext into Trash. Reboot mac.
Be sure to reboot the computer afterwards. You may also have to delete the old printer queue and setup a new one after also.
Let me know if this works and Good luck!
03-29-2012 11:58 AM
Thanks for the info Sean, but it didn't work. Guess I will continue to turn the printer on and off. At least until it dies completely. Unless someone else has another suggestion?
03-29-2012 01:58 PM
03-29-2012 02:06 PM
A few months back. I've been struggling with turning the printer on and off for a while. Don't print much anymore and just didn't have a lot of time to try and trouble shoot.
03-29-2012 02:09 PM
Hum. Let's uninstall with the 'scrubber option' like this:
1. Go to Applications/Hewlett Packard/ click on HP Uninstaller and click Continue
2. Highlight your device on the left pane
3. Hold the Ctrl, Opt and Cmd keys and click on Uninstall
4. There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
5. Click Continue and let it finish
Now, run a Software Update. This can be done by clicking the Apple in the top left of the screen then clicking Software Updates.
Next, let's reset the printing system:
Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Default tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Let me know how this works for you.
- HP Printers - Using HP Diagnostic Tools for HP Printers in Windows
- HP Printers - After Windows 10 Upgrade, Printer Does Not Print
- HP Printers - Using Google Cloud Print with Your HP Printer
- HP Printers - Printer is Offline (Windows)
- HP LaserJet Pro Printers and Multifunction Printers - HP Smart Install Discontinuation