HP Support Forums
Join in the conversation.
01-13-2009 10:20 AM
I got a C4580 for Christmas, installed it on my Mac to print over the wireless network, and everything worked. After a while it stopped printing; after trying a few things I deleted the printer and then went through the complete install process again, and it printed for a while, but now it has stopped printing again. For a while, I would get a message frequenly on the Mac that indicated it had lost the connection and ask to reconnect. I would tell it to reconnect, and it would print. Now I get that message, but it doesn't print after I reply. I just deleted the printer, reinstalled it from Preferences, and it still will not print.
In the printer utlility I can print the test page. Photosmart Studio can read the scan image. The imbedded web browser communicates and gets believable results for the ink levels.
When I try to print something, it goes onto the print queue for a few seconds, then the queue empties out, just as if it has printed, but the printer does nothing. I can pause the printer, queue things to print, and then restart it. They go off the queue slowly, but nothing prints. If I try to scan something using the printer utility, the scanner process hangs for a long time. While it is waiting, the printer says it is scanning, but the scanner never moves. Eventually the printer says it is canceling, and the scan process eventually says it is getting an error.
01-13-2009 01:17 PM
01-13-2009 02:53 PM
Actually, I seem to have found a solution, but only in the lamest sense of the word. I took the cd with the original software, reloaded it, and was able to print.
Of course, that took 20-25 minutes to print three or four pages, a significant amount of my time to answer all of the prompts, and I wound up with the version of software that has already been updated twice. There is no way to tell if I need to do this other than "printing" something, walking downstairs to see if it worked, and then reloading.
Unless the people who want to sell these printers can find something a lot better, I would not be able to recommend this to my friends.
01-13-2009 03:29 PM
01-14-2009 01:52 PM
I had same kind of problems, like other customers (both Mac and Windows users), as described in another thread.
My advice : take the C4850 back to the shop and get a refund.
01-16-2009 04:05 PM
The issue may be resolved.
In one of the responses for HP support, they said to delete the printer and redefine it, step 3 was:
Add the printer that says Network or HPIP instead of Bonjour.
Somebody somewhere said there were problems with Bonjour. I do not know what that means, but I did this two days ago and so far have had no problems. We will see, I guess.
01-17-2009 02:16 AM
Interesting ... I usually recommend just the opposite: use Bonjour instead of HPIP.
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.