Photosmart D110 series won't print!

[chloekayne]

I'm trying to print a MS Word document on a mac using the Photosmart D110 series all-in-one printer, but it just won't print. I've gone through all the steps on the HP Support thing in addition to my own tactics, but NOTHING will work! I'm freaking out, I need this printed ASAP.

Here is what I've done so far:

*I deleted the printer from the list, restarted the computer, and then added the printer back to the list.

*I unplugged the cord from the rear of the printer and the wall outlet, waited 15 seconds, and plugged both back in.

*I've restarted both the computer and printer.

*I've aligned the cartridges

*I've printed out a Wireless Network Test Report (the printer's connected - both the printer AND computer say there's no connectivity issues. I've got the green light in the "Printer & Fax" box on my computer)

But when I print, the document shows in the print queue and says: Printing page 1, 0% complete... Unable to connect to printer; will retry in 30 seconds...

[PrintDoc]

What version of OS X?  What router?

Let's reset the printing system:

- Go to System Preferences > Print & Fax
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.

[Diamm]

I have a year old hp photosmart d110a all in one wireless printer. It had been printing beautifully for me (emails, recipes, photos, etc.) and now will not print any of those items. My iPad 2 says it is sending to the printer and preparing whatever I am printing, but nothing ever prints now. Any suggestion on how to get it to print again? Thank you, Diamm

[PrintDoc]

Turn the printer off.  Restsart your router by pulling its power plug momentarily, then wait for it to restart.  Turn the printer back on.

[Wom]

EXACT SAME PROBLEM!  You're not alone, the printer will say that its connected and when you print something it will even say it printed...Sometimes ill try to print something and it will say it printed but it won't.  Aproximately 4-6 hours later (not exaggerating) the printer actually prints it.  Anyways this printer sucks.

[Wom]

Finally got it to work!  All you have to do is reset your connection with it.  I think its because it trys to use bluetooth even if your connection is bad but says your connected because you're hooked up with the wire.  To fix just follow what the guy above says,  Remove the printer and add it again and if that doesn't work restart your computer and disconnect the printer and turn off the printer and try to disconnect your connection but mine is back online now

Thanks

[Jazzy333]

same problem....if it prints, but yeah went through the hours of waiting for something to print!!  this printer does suck!

[PrintDoc]

What router?

[chance06]

I've had mine for a little over a year. it use to work fine when I'd go offline and switch to the printer. ever since I attached the printer to my wireless it works when ever it feels like and says I have problems with the ink cartridges when there is nothing wrong, when it does this it wont work for about a week. I have a Mac book and it is updated to the latest software, what should I do????

[PrintDoc]

What router?