03-23-2010 10:19 AM
Ok, i haven't really seen this happen before, but the back story is this.
I bought a dv7-1245dx about 4 days before the free windows 7 upgrade, and was actually not too upset with vista until a month in when it took 15 and a half minutes for it to start up.
I upgraded to windows 7 and everything has been great until yesterday. I am in central america working on a conservation project, and i went in to start up my comp.
it started up, went through the windows screen, login screen, and started windows about 3/4 of windows was loaded and the comp shut down.
After three times of this, I reseeded everything, and took out the battery. It stayed on with no problem. I called support, and of course since I paid for windows 7, instead of HP paying for it, they will not do anything.
I finally had it on long enough to test the battery in HP support assistant, however it showed up fine. I am now stuck working on a conservation project in the middle of the jungle with intermittent electric and lose whatever work I don't save every minute...
Just wondering if anyone has any other ideas on what I can do to definitely diagnose the battery as the issue or not. I am going to attempt to recalibrate the battery at some point, but would not like to have to reinstall vista, run all their diagnostic tests, and then possibly get a new battery sent to me in NY which will then take weeks to get to me, when I can go to san jose in one day and buy a battery.
Any ideas are greatly appreciated.
03-24-2010 02:27 PM
Still no responses, so I am bumping this. Please let me know any ideas that might be something OTHER than battery problem..
03-24-2010 03:29 PM
Try a power reset by unplugging the laptop, remove the battery and then hold down the power button for 30 seconds.
Have you tried booting in Safe Mode F8 at boot time with the battery installed?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP ENVY 17t Touch,i7-6500u,6GB, 256 GB SSD (on loan)
HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4790k, Z97, 16GB 2400 MHz DDR3, Intel 750 PCI-E SSD, (2)Samsung EVO 840 SSD, Corsair HX650, GTX 980TI, Corsair H75 water cooler
Windows 10 Pro in UEFI mode - production system
Windows 7 and 8 in UEFI mode - test systems
03-24-2010 03:39 PM
yeah i tried cycling and draining the power, as well as in safe mode. The ONLY time the comp stays on, is when no battery is in, and plugged into the wall..just hoping my battery backup works long enough to ensure my work is saved before it shuts off. I am in the jungle, and power outages occur daily, and in most cases multiple times....
- HP PCs - Error Messages Display on a Black Screen during Startup or Boot (Windows 10, 8, 7)
- HP PCs - Error Messages Display on a Blue Screen during Startup or Boot (Windows 10, 8, 7)
- HP Notebook PCs - Computer Starts but Screen Remains Blank (Windows 10, 8)
- HP Notebook PCs - Computer Does Not Start (Windows 10)
- HP PCs - Sleep and Hibernate Issues (Windows 10, 8)