How to replace memory or hard drive?

[Brad_Boozer]

Can't find manuals or videos for this specific model disassembly. I'm an IT pro and I don't want to chance damaging an HP case (I just did that to a G3). Help? Ideas? 

[GBL84]

Hello,

Please try this :

 1) http://support.hp.com/in-en/document/c04330942

2) https://www.youtube.com/watch?v=JLIxdw1-uxU

Hope this helps, for any further queries reply to the post and feel free to join us again

 **Click the White Thumbs Up Button on the right to say Thanks**

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Thank You,

GBL84

I am not an HP Employee 

[Brad_Boozer]

Thanks, however, this is for the previous model. I have seen 2 different styles in videos. If only it were as easy as the model you provided, I would have never had to post. There is no open panel on the bottom. On the other model, there wasn't one either, but it had a body around the keyboard. On this model, the case is molded around the keys. There is no clear place to crack the case to get in to remove drive or add memory. 

[Paul_Tikkanen · Accepted solution]

Hi:

See if this is the right manual...

 　

HP Notebook PC (AMD) * Models: 15-ba100 – 15-ba199 * Models: 15-ba000 – 15-ba099 * Models: 15-bf100 – 15-bf199 * Models: 15-bf000 – 15-bf099 * Models: 15-bf100 – 15-bf199 * Models: 15-bg000 – 15-bg099 HP 255 G5 Notebook PC Maintenance and Service Guide

http://h10032.www1.hp.com/ctg/Manual/c05227786

[GBL84]

Hello,

Please check this guide add see if that helps: 

http://h10032.www1.hp.com/ctg/Manual/c04886216

Good Luck !

Hope this helps, for any further queries reply to the post and feel free to join us again

 **Click the White Thumbs Up Button on the right to say Thanks**

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Thank You,

GBL84

I am not an HP Employee 

[Brad_Boozer]

Thanks! Correct manual and I see the issue. Screws hidden under 2 rubber bumpers. Will try in the morning. Thanks again!

[Paul_Tikkanen]

You're very welcome.