12-09-2013 02:55 PM
My new digital frame (df1010v2) doesn't size the photos fit the frame. Most photos are cut off on all four sides. The online user's manual doesn't address this trouble.
Thank you, Don Petersen.
12-19-2013 12:36 AM - last edited on 02-24-2017 01:20 PM by OscarFuentes
I'm not too familiar with digital picture frames, but it sounds like they would have similar technology to televisions with the aspect ratio of images. I'll post three links for you in hopes that they help a bit:
Consumer Report Tips on setting up digital frame ratios
The HP help page for the Remote Control that should help you navigate to the menus for the settings.
And finally, the PDF with the links to tech Support in case more help is needed.
Good luck, and hope it works out for you
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***
01-13-2014 03:11 PM - last edited on 04-20-2016 11:32 AM by OscarFuentes
and see if it helps. It talks about working with Photos using an HP digital picture frame including zooming in and out at rotating. Good luck.
Clicking "Accept as Solution" on a reply that solves your issue makes it easier for other people to find solutions.
I work on behalf of HP.