Question
Reply
 
Honor Student
AntoG86
Posts: 4
Member Since: ‎04-20-2013
Message 1 of 7 (1,944 Views)
Accepted Solution

HP Mini 110-4100 [RAM UPGRADE]

Hi all,

 

I recently bought an HP Mini 110-4100 (blue color) and it has 1 GB of RAM on board.

 

I've not been able to find specific posts about this particular model in the blog (since there are different 110 models), so I opened this new one.

 

Basically, I was wondering whether I can upgrade the RAM of this netbook, and if yes how many GBs can I go for (maximum) and what type. I've contacted HP about it and they told me that it is not possible to mount more than 1 GB of RAM on this netbook, but I believe it's a bit odd to be honest.

 

If you know more, please write here. I would really like to increase this netbook performance even if for a tiny bit.

 

Thanks all!

Regents Professor
ManjunathTech
Posts: 4,411
Member Since: ‎01-21-2012
Message 2 of 7 (1,940 Views)

Re: HP Mini 110-4100 [RAM UPGRADE]

Hi

 

Your unit can support 2GB Memory.

 

Memory One customer-accessible/upgradable memory module slot
DDR3-1066-MHz single channel support (on computer models equipped with an Intel Atom
N2800 processor), DDR3-800-MHz single channel support (on computer models equipped
with an Intel Atom N2600 processor)
Supports 2-GB of system RAM (2048×1)

Let us know how it goes!

"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****

Regards
Manjunath
Honor Student
AntoG86
Posts: 4
Member Since: ‎04-20-2013
Message 3 of 7 (1,934 Views)

Re: HP Mini 110-4100 [RAM UPGRADE]

[ Edited ]

Hi Manjunath,

 

thanks a lot for your quick reply.

 

I was therefore wondering if the following is suitable for my netbook:

 

Memory Size: 2 GB    

 

Memory Technology: DDR3 SDRAM    

 

Error Checking: Non-ECC

 

Product Type: RAM Module

 

Memory Speed: 1066 MHz

 

Signal Processing: Unbuffered

 

Not too sure if I should go for a buffered or unbuffered one though, and I believe the Memory speed is more than the one supported from my CPU? And also, when looking for Ram, shall I look for 200 pin Ram or?

 

My current CPU is an Atom Dual Core N2600.

 

Also, according to PC Wizard, the current ram installed is a very slow one (not even 800 MHz):

DDR3-SDRAM PC3-10700 (667 Mhz) - [DDR3 - 1333]

 

And, also according to PC Wizard, my memory controller has a "Max. Module Size: 4096 MB", so 4 GBs?

 

Please let me know.

 

Thank you again!

Regents Professor
ManjunathTech
Posts: 4,411
Member Since: ‎01-21-2012
Message 4 of 7 (1,917 Views)

Re: HP Mini 110-4100 [RAM UPGRADE]

Hi

 

As per the specs given on the website

 

DDR3-800-MHz single channel support (on computer models equipped with an Intel Atom N2600 processor) Supports 2-GB of system RAM (2048×1) should work fine on your unit.

Let us know how it goes!

"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****

Regards
Manjunath
Honor Student
AntoG86
Posts: 4
Member Since: ‎04-20-2013
Message 5 of 7 (1,911 Views)

Re: HP Mini 110-4100 [RAM UPGRADE]

Thank you!

 

Ordered a 2 GB RAM module SODIMM 800 MHz, let's see how it goes :smileyhappy:

Student
charles224
Posts: 1
Member Since: ‎06-19-2014
Message 6 of 7 (448 Views)

Re: HP Mini 110-4100 [RAM UPGRADE]

Did it worked? :smileyhappy:

Honor Student
AntoG86
Posts: 4
Member Since: ‎04-20-2013
Message 7 of 7 (420 Views)

Re: HP Mini 110-4100 [RAM UPGRADE]

Yep, like a charm :smileyhappy:

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation