This HP Community is for Customer to Customer Product Support. First Time Here? Check Out Videos on How to Search, Register, Post and More.

Re: Problem with Pavilion dv8 top slider bar (treble/bass control) (1240 Views)
Reply
Honor Student
Drtalley
Posts: 5
Registered: ‎05-22-2011
Message 251 of 274 (1,416 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

[ Edited ]

I have been battling this issue on my Pavilion dv8 for two years.  After returning it for repair the problem returned in a few weeks.

After reading about the issue of static build up, it came to me to fight the static magnetic field with another magnetic field. 

I cut a strip: 1" long by 3/4 " wide from the Real Estate Magnet Calendar on the refrigerator door.  It is about as think as my finger nail.  

I placed this on the metal speaker housing just above the blue internet indicator light.  I covered up the word Altec and left Lansing exposed. Notice I said "BLUE"   not "Orange".

Result:  After two days of testing I have only had it go Orange on time. 

 

The Internet connection light turns off and on easily, and the Treble and Volume touch pads work as well ...

 

Let me know if it works for you, I had punched mine once before and it worked Ok for 2-3 hours, but I have a  sore knucke ...  Ouch ...

 

Dr. Jim A. Talley {Personal Information Removed}

 

 

Please use plain text.
Distinguished Professor
HaggisCat
Posts: 4,162
Registered: ‎12-28-2009
Message 252 of 274 (1,407 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

Interesting idea, if the problem persists place the magnet on the speaker grill, but move it to the centre of the bezel area, or even better leave your first one where it is and place the new one in the centre.

 

 The centre is where the cable is inserted into the ZIF connector and I believe that is where the problem originates from. The ZIF connector has exposed solder connections in that area which make it susceptible to static electricity.

 

 My theory why the dv8 is afflicted with this problem and not the HDX is that the dv8 has extra circuits on the motherboard where the exposed ZIF connector connections are. On the HDX that same area on the motherboard has no circuitry and there for does not affect the ZIF connector on the bezel.

 

 And in case you are wondering why I am comparing the HDX to the dv8 is that the laptops are the same except for the motherboard and even they are almost the same shape and size. I have even converted an HDX to a dv8 by fitting a dv8 board into a HDX case.

Please use plain text.
Honor Student
Drtalley
Posts: 5
Registered: ‎05-22-2011
Message 253 of 274 (1,392 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

When I took the paper backing off the magnet, it did not as well, so I have to cut off another piece and leave the paper backing on...

This really works. I am amazed, the key was when you mentioned static ...
Please use plain text.
Distinguished Professor
HaggisCat
Posts: 4,162
Registered: ‎12-28-2009
Message 254 of 274 (1,383 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

Interesting... The magnets are creating a tiny magnetic field that disrupts the internal static discharge in that area.

 Wish I had thought of that. :smileysurprised:

Please use plain text.
Student
kenp2009
Posts: 1
Registered: ‎03-17-2012
Message 255 of 274 (1,261 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

Unbelievable!!! - I've had the same issues with the wi-fi dropping in and out, but since I tried the magnet placement (cut up a magnetic calendar with paper backing too) it's worked like a charm - havent had a drop since I placed it up there - THANKS!!! (about 50 hours on multiple starts since I placed the magnet there w/o a signal drop or wifi button freaking our between red and blue)

Please use plain text.
Honor Student
Drtalley
Posts: 5
Registered: ‎05-22-2011
Message 256 of 274 (1,240 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

It seems that the static over time will weaken the magnet, so I have had to replace the magnetic strips in about a month.  

Long term solution:  Buy a new laptop without the touch strip and Windows 8, that will give a new set of issues to work ...    

Please use plain text.
Honor Student
lilbear
Posts: 5
Registered: ‎04-07-2012
Message 257 of 274 (1,043 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

I found a red-heart magnet! it is in place-disconnecting ethernet now!

 

Please use plain text.
Honor Student
Drtalley
Posts: 5
Registered: ‎05-22-2011
Message 258 of 274 (1,000 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

.

You can not use anything very thick, it will break your screen when you close the lid ... I have started using these mangetic Business Cards, cutting them in half , putting one half above the Internet light to keep it "Blue", I love blue, I hate orange ...  put the other half above the Volume mute button ...

I have to change these out every 3-4 weeks, they loose the magnetic charge ...

Sometimes I take the magnets off and let it run till I get 2-3 orange lights and then put the magnets back on ...

 

I hope to order my new HP ENVY, without this issues and a BACKLIT KEYBOARD ....

The Rule:  Buy a new Laptop every other year ....   put it in your budget ...$1200 a yead ....

MOORE"S LAW:   The speed of the CPU, will double every 18 months, it has never missed in 35 years ...

Have a great week ...   NO ORANGE LIGHTS ..!!!! 

Please use plain text.
Student
caa1955
Posts: 1
Registered: ‎05-26-2012
Message 259 of 274 (864 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

Has this problem been fixed?

 

Please use plain text.
Top Student
Snooker
Posts: 9
Registered: ‎11-09-2010
Message 260 of 274 (845 Views)

Re: Problem with Pavilion dv8 top slider bar (treble/bass control)

Not by HP.........

Please use plain text.