Post new question
Question
Reply
 
Student
Posts: 1
Member Since: ‎07-16-2012
Message 1 of 4 (4,652 Views)

Recovery Disks for HP Pavillion dv6500

My hard drive has died and I had to get a new one.  However, I cannot find the recovery disks on the HP website.  Does anyone know what I can do in order to reinstall the operating system and drivers?

 

Thanks.

Reply
0
Provost
Posts: 40,019
Member Since: ‎01-07-2009
Message 2 of 4 (4,650 Views)

Re: Recovery Disks for HP Pavillion dv6500

How to order recovery disks from HP.

 

Ordering a recovery disk set from an HP Partner.

If you would like to say thanks, then click on the thumbs up icon next to the Reply button.

If I have helped you to resolve your issue or answered your question, please click the Options link in the post that helped you and then click on the "Mark as Accepted Solution " button
Associate Professor
Posts: 1,064
Member Since: ‎04-20-2009
Message 3 of 4 (4,644 Views)

Re: Recovery Disks for HP Pavillion dv6500

[ Edited ]

Option 2 is download correct generic OS setup (match version on windows label on base of notebook) from Microsoft .

Then download required drivers from HP driver support page.

Like my post? Click Kudos (thumb+) to show appreciation.
Provost
Posts: 78,787
Member Since: ‎07-13-2010
Message 4 of 4 (4,637 Views)

Re: Recovery Disks for HP Pavillion dv6500

Hi:

 

The dv6500 came standard with windows vista, so W7 installation files won't work because the product key will be for vista;

 

Use this method to create a vista installation disk for your notebook if you can read the product key. If you can't you will need to purchase recovery disks which don't need the product key to work.

 

If you can read your 25 character MS product key, you can make your own Windows Vista installation disk. Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.

 

When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.

 

I selected No, make the ISO file.

 

It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.

 

I tested both of them (just short of going ahead with the actual install) and they appeared to work perfectly.

 

Apparently when you enter the product key, it knows what version of Vista you have.

 

http://en.community.dell.com/support-forums/softwa​re-os/w/microsoft_os/3317.2-3-microsoft-windows-v...

 

After you successfully install vista, you can download the drivers you need from your PC's support and driver page.

 

Paul

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation