06-08-2014 01:32 PM
I have updated to win8.1 and HP 3D DriveGuard cannnot detect my HDD or SSD. Both are shown as "Hard-Drive not supported". I have tried using multiple version of the same with no results. I have latest versions of all drivers. As 8.1 is relatively old now, I expect there would be an update to solve my issue...Anybody aware of the same..??
06-08-2014 01:50 PM
Have you tried this version?
This is for the protectsmart hardware ID version of ACPI\HPQ0004.
06-08-2014 02:29 PM
Hey....How did u find the 3D Protect harware ID...? Its that of the accelorometer right..? I didn't find that in the Device manager..What is it named..? I have one sensor called "location sensor" I think....
06-08-2014 02:40 PM
and yes..I have unistalled my old driver and installed the one found in ur link...but there is no change what so ever. Still the driver is not supported..
06-08-2014 04:11 PM
Yes, the accelerometer would be the device to check the hardware ID on.
You would click on the details tab and then there is a property drop down list.
You select the second item (hardware ID's).
The top line would show the ACPI\HPQ0004. If it shows an ID of 6000 or 6007, then a different driver is needed.
I have seen the problem you are having reported by other forum members and unfortunately, if you tried that driver and it still doesn't work, then nothing will.
I have even walked folks through manually selecting the specific setup information file to install the driver and even that doesn't work.
But let me know if the hardware ID is different than 0004 because there are different drivers necessary.
The good news is that a SSD has no heads to park in the event of a sudden jarring or low height fall of the notebook, so the 3D driveguard is N/A to a SSD.
06-09-2014 02:54 AM
Under device manger>System Devices>HP Mobile Data Protection Sensor>Harware ID reads like this for me...
SO I think it's the "004" u where talking about.
So my question would be, is there any win8.1 driver for this hardware that is known to work well..??
nd Do anyone have such a combiniation working..??
06-09-2014 07:15 AM
Yes, that is the ID and the driver I posted is the only one I know of that should have worked.
As I stated before, I have read a few posts from some forum members who were unable to get the device to work, and unfortunately, I do not know what you will ever be able to do about it.
06-09-2014 08:52 AM
SO, that's the scenario... :-(
I hope (against hope) that HP/Microsoft might roll out an update to make my accelerometer more than just an addional payload on my back... :-(
Meanwhile, anyone with the following hardware ID is totally welcome to share what driver u guys use....