Question
Reply
 
Student
souvikbanerji
Posts: 1
Member Since: ‎11-23-2010
Message 1 of 11 (22,072 Views)

How to change SATA mode from AHCI to ATA in HP G42-355TU Laptop

Hi,

 

Recently I buy one HP G42-355TU Laptop. I tried to install windows XP on it. But it is giving me a blue screen with an error showing the hard is may not configured properly. Someone told me to try to change the SATA mode from AHCI to ATA from BIOS first, then I need to try the XP installation. But in the BIOS I am not getting such option. Can anybody please help me.

 

Thanks in advance.

 

--

Souvik

Associate Dean
Mumbodog
Posts: 11,026
Member Since: ‎01-11-2010
Message 2 of 11 (22,054 Views)

Re: How to change SATA mode from AHCI to ATA in HP G42-355TU Laptop

You cannot change it, you will have to slipstream the Sata driver into the XP installation CD.

 

http://www.digitgeek.com/how-to-slipstream-sata-drivers-into-xp-cd/

 

.

 

 

Intern
Aust1mh
Posts: 30
Member Since: ‎05-12-2009
Message 3 of 11 (22,041 Views)

Re: How to change SATA mode from AHCI to ATA in HP GAG-35TH Laptop

It gets hard to help with this subject as there are so many different BIOS versions around.

 

Be it should look like the below. Set to IDE or as suggested above... build the SATA driver

into the Windows XP disc

 

IMG_0104.jpg

 

 

Honor Student
shankarmahato
Posts: 3
Member Since: ‎03-01-2011
Message 4 of 11 (21,115 Views)

Re: How to change SATA mode from AHCI to ATA in HP G42-355TU Laptop

ples help

Honor Student
shankarmahato
Posts: 3
Member Since: ‎03-01-2011
Message 5 of 11 (21,110 Views)

Re: How to change SATA mode from AHCI to ATA in HP G42-355TU Laptop

How to change SATA mode from AHCI to ATA in HP G42-355TU Laptop

Honor Student
shankarmahato
Posts: 3
Member Since: ‎03-01-2011
Message 6 of 11 (21,109 Views)

Re: How to change SATA mode from AHCI to ATA in HP G42-354TU Laptop

Re: How to change SATA mode from AHCI to ATA in HP G42-354TU Laptop.ples help

Provost
CherylG
Posts: 22,487
Member Since: ‎11-12-2008
Message 7 of 11 (21,095 Views)

Re: How to change SATA mode from AHCI to ATA in HP G42-354TU Laptop

You cannot change it, you will have to slipstream the Sata driver into the XP installation CD.

 

http://www.digitgeek.com/how-to-slipstream-sata-dr​ivers-into-xp-cd/


******Clicking the Thumbs-Up button is a way to give Kudo's -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others who are searching**
Top Student
karockiad
Posts: 9
Member Since: ‎08-13-2011
Message 8 of 11 (18,955 Views)

Re: How to change SATA mode from AHCI to ATA in HP G42-354TU Laptop

This section is very informative... but failed in my case.. it will b great if it is detailed,.. link posted is giving me very minimal details..

 

Provost
CherylG
Posts: 22,487
Member Since: ‎11-12-2008
Message 9 of 11 (18,947 Views)

Re: How to change SATA mode from AHCI to ATA in HP G42-354TU Laptop

Try the Guide done here at our forum:

 

http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/SATA-drivers-for-XP-solution-on-0x000000...


******Clicking the Thumbs-Up button is a way to give Kudo's -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others who are searching**
Honor Student
AdryanJonly
Posts: 2
Member Since: ‎07-11-2014
Message 10 of 11 (1,597 Views)

Ask How to change SATA mode from AHCI to IDE in HP 240 G3 Notebook PC

[ Edited ]

please help from all friends and masters. I have a laptop hp 240, I want to downgrade from windows 7 to windows xp. but frequent blue screen. thank you

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation