HP Support Forums
Join in the conversation.
First install this and reboot:
MS-UAA (required with a reboot before Audio) here
then try one of this drivers:
IDT High-Definition Audio CODEC Driver,
1. sp41693, vista driver, reported work in XP here
2. sp39671, vista driver, reported works in XP here or here
NachoConde wrote:When i start to install the IDT audio, said the same that posted Caezar..
Post here this what You see when installation starts if there still be any problem.
Drivers for remote:
ENE CIR (Infrared Reciever) here
|
Microsoft MVP Windows Expert - Consumer
Hi Daniel,
Well, i start to telling you what happend. With the Remote Control, the driver sp42722 that you attached me, didn't work. I downloaded the driver for windows vista from the hp web, and this works ok. I attach the links for someone who need them.
Here is the link: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41645
With MediaSmart i downloaded all the drivers for windows vista form de hp web for this laptop, obviously.
Here are the links: ftp://ftp.hp.com/pub/softpaq/sp42501-43000/sp42848
ftp://ftp.hp.com/pub/softpaq/sp43501-44000/sp43595
ftp://ftp.hp.com/pub/softpaq/sp43501-44000/sp43591
ftp://ftp.hp.com/pub/softpaq/sp42501-43000/sp42847
ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42238
But, for the "audio", i didn't had luck. I tried with many things. At first time i tried to install the drivers that you recommend, but if i install without unzip on of the show me an errors, and the otherone show me a poster said me that is not a driver for this audio. But, if i install after unzipped the driver, the only one that works is sp41693, one of you have attached me. First i have to install "kb835221", who appears when i unziped the package here (\sp41693\HDAQFE\win2k_xp\us\kb835221.exe). The i had to install the Setup.exe of \sp41693, idem of the unziped. All of this install the IDT high definition audio and at this point also appears NVIDIA HDMI audio, that it was already installed, but it didn't apears in Manage Device. All of this is working correctly while windows xp is startup, but when you shut down or restart the sound stop working, and i have to reinstall following the same steps.
Regards.
Note: i don't know if this helps you, but i had installed the SP3 for windows xp. Also the laptop don't restart automatically, i have to press the button of shut down when i want to restart, and press again to startup.
Solution written by Rakhmad:
If you found the sound was not working after restart, do the following steps
1. Download devcon command line utility, here
2. Extract and copy the file to c:\windows\devcon\i386\devcon.exe
3. Make command line to restart MS-UAA automatically or just download this file
The command line as: C:\windows\devcon\i386\devcon.exe restart "PCI\VEN_8086&DEV_293E&SUBSYS_3607103C&REV_03"
Notes:
1. The location of devcon.exe is in c:\windows\devcon\i386\devcon.exe if you change it, you need to edit idt.bat
2. "PCI\VEN_8086&DEV_293E&SUBSYS_3607103C&REV_03" is hardware ID for MS-UAA, if you found it in a different name change it.
3. Place idt.bat in c:\Documents and Settings\All Users\Start Menu\Programs\Startup
4. The sound will be restore within 6-10 seconds, because of that there is NO sound of XP start-up
Good luck
|
Microsoft MVP Windows Expert - Consumer
@cdgreat,
There are big problems with drivers to XP 64 bit version, software, etc. This version isn't as good supported as other system. I know the there is one difference which may be very importnat to You. Then XP 32 bit can hold only 3,5GB of Ram and 64 bit version all that chipset can take. If You need full Ram for any program or anything else the best choice is to use two systems. One will be XP32 bit and second Vista x64 or Win7 x64 which is now in beta test mode.
|
Microsoft MVP Windows Expert - ConsumerIf you found the sound was not working after restart, do the following steps
1. Download devcon command line utility, here
2. Extract and copy the file to c:\windows\devcon\i386\devcon.exe
3. Make command line to restart MS-UAA automatically or just download this file
The command line as: C:\windows\devcon\i386\devcon.exe restart "PCI\VEN_8086&DEV_293E&SUBSYS_3607103C&REV_03"
Notes:
1. The location of devcon.exe is in c:\windows\devcon\i386\devcon.exe if you change it, you need to edit idt.bat
2. "PCI\VEN_8086&DEV_293E&SUBSYS_3607103C&REV_03" is hardware ID for MS-UAA, if you found it in a different name change it.
3. Place idt.bat in c:\Documents and Settings\All Users\Start Menu\Programs\Startup
4. The sound will be restore within 6-10 seconds, because of that there is NO sound of XP start-up
|
Microsoft MVP Windows Expert - Consumer
1.Vista problem:
Click with right button of Your mouse on this unkown device and choose properties. Then go to bottom details and paste here device id. This way we will know what it is.
2.XP problem:
Daniel_Potyrala wrote:
2. "PCI\VEN_8086&DEV_293E&SUBSYS_3607103C&REV_03" is hardware ID for MS-UAA, if you found it in a different name change it.
Go to Control Panel -> System -> Hardware -> Devices Manager -> Sound, video and game controller
Click with right button of Your mouse on IDT and choose properties. Then go to bottom details. Check is there the same information as in point 2. If not edit this idt.bat file and put there this what You found in details.
3. Place idt.bat in c:\Documents and Settings\All Users\Start Menu\Programs\Startup
Have You done this with restart?
|
Microsoft MVP Windows Expert - Consumer