Hp Pavilion 2910US all drivers for XP SP3

[fbiancotti]

someone could help me pleaseeeeeee.... i need all the drivers or the post to find them...

[CherylG · Accepted solution]

Intel Chipset Installation Utility:

ftp://ftp.hp.com/pub/softpaq/sp36501-37000/sp36880.exe

Intel Graphics:

ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38326.exe
 
=================
 
MS UAA for XP SP3 (before Conexant):

http://couponmeister.com/blog/HD_Audio/KB835221.exe
 

Conexant Smart Audio 221:

http://www.mediafire.com/?lgiwcooxdkk
 

Unzip to a folder...use Device Manager.
 
From Device Manager,right click "Audio Device on High Def Bus",choose Update driver,
 
No to connect,
 
Install from a list or specific location,
 
Select Don't Search, I will choose the driver to install,
 
For the Hardware Type select 'Show All Devices'
 
Remove the check from "Show Compatible Hardware" and click on "Have Disk".
 
Next...browse to the unzipped folder and choose the "WiSVHe5.inf".
 
Ignore XP when it complains.
 
Reboot.
 
======================
 
Use your Vista drivers for HP Quick Launch,Alps Touchpad,Ricoh Card Reader and Marvell Yukon Ethernet...Cyberlink You Cam also works in XP:

http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&product=3747188&lang=en

=================
 
Windows Installer 3.1(required before wireless:

http://tinyurl.com/9cg2y

Intel Wireless:

ftp://ftp.hp.com/pub/softpaq/sp40001-40500/sp40120.exe

[fbiancotti]

thanks cherylg... all are working now.. but my microphone isnt... what can i do??

[CherylG]

Great to hear the drivers worked well for you, thanks for posting back with success. On the Mic issue_did it work in Vista? Mine on DV2810US doesn't work even using the original HP installed Vista.Seems there is a serious flaw in these mics.

A friend has the same model as you and is dual-booting XP & Vista.I will ask him if his works.

[fbiancotti]

I want to used it now on msn and I cant .. the option in the Sound control panel is disabled the microphone volume .. I cant understand .. I installed the Conexant... cherylg.. i´ll be waiting for a solution .. im very grateful with you...

[fbiancotti]

with the conexant 221 may i configure the mic?? i think that isnt possible for me cheryl... im going to wait your post...

[Rakhmad]

The mic feature in conexant 221 for XP was not in the perfect condition due to 

To to configure?

Go to control panel, double click Sounds and Audio Device, Tab to Voice, in voice recording, click volume. You may increase/decrease the volume there.

or

You may just double click sound icon in the task bar, click option and properties, change mixer device to Conexant HD Audio input click OK.

Both steps would bring you to the same recording volume.

If you feel the mic still not load enough, click option and click Advance Controls, youl'll notice a new Advance button, click it.

In other control radio button, click Microphone Boost.

Other option to configure is using Smart Audio in control panel, you may try 3 options that available.

Those options configuration still not in perfect condition for my model (see my sig). Sometimes, I need to raise my voice when I'm doing a voice chatting with my friends.

I had not tested it much with VISTA, my notebook was downgraded to XP at the first day.

Message Edited by Rakhmad on 04-09-2009 12:13 AM

[CherylG]

As posted by Rakhmad- my friend emailed back with this from his dv2910us>>>>

"....Ok, mine (same driver) works fine in XP, using Cyberlink YouCam program to test. However, I needed to go into audio properties in control panel, voice tab, use test hardware to set mic volume & playback volume. That should do it.

If still no luck, have him open 'Smart Audio' icon in control panel, and set to defaults also."

[fbiancotti]

i use the hardware test and its working now... but VERY slownly.. lol... thanks for both... im going to install the ciberlink now and i`ll see whats matter later

[fbiancotti]

 

hello again .. I try to use my headphones but dont work.. when i connect the headphone i hear just the speakers built .. what can i do for fix that?