This HP Community is for Customer to Customer Product Support. First Time Here? Check Out Videos on How to Search, Register, Post and More.

Re: Recovery discs not working (105 Views)
Reply
Honor Student
mustafa3000
Posts: 2
Registered: ‎08-08-2012
Message 1 of 2 (120 Views)

Recovery discs not working

Hi,i have Hp pavilion dm4-2070us refurbished laptop, i installed a fedora 13 operating system on it beside windows 7 .. now win 7 not working only fedora works and i need windows 7 also...i tried to use the recovery discs which i created befor but its not working and it shows the following when I boot up and press F11 it shows this:

 

Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1 Insert windows installation disk and restart computer.
2 Choose your language settings and than click next.
3 Click repair computer.
If you do not have this disk contact your system admin or computer manufacturer for assistance.
Info: An error occurred while attempting to read the boot config data.
File: /Boot/CD
Status: 0XC0000225

 

 

i made a test on the Hard Drive and memory both shows pass...please help me to recover the windows.

Thanks in advance.

Please use plain text.
Provost
DavidPK
Posts: 23,422
Registered: ‎09-24-2010
Message 2 of 2 (105 Views)

Re: Recovery discs not working

Hi,

 

Before doing anything, make sure you back-up any personal files etc from the linux partition just to be on the safe side, then try the following to see if it will allow Windows 7 to boot.

 

*******************************************************************************

 

If you don't already have one, use another PC to create a Windows 7 Rescue CD.  Download the relevant ISO from the links below.

 

Windows 7 32bit

 

Windows 7 64bit

 

You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here.  Once created, or if you already have this, insert the Rescue CD into the notebook and restart to boot from it.  Select Repair Your Computer and choose the Command Prompt.  When this loads, enter the following commands and hit enter after each one - include spaces as shown.

 

Bootrec.exe

bcdedit /export C:\BCD_Backup

c:

cd boot

attrib bcd -s -h -r

ren c:\boot\bcd bcd.old

bootrec /RebuildBcd

bootrec /fixmbr

bootrec /fixboot

 

Remove the Rescue CD and try rebooting the notebook.

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****


Microsoft MVP - Microsoft Windows Expert - Consumer

Please use plain text.