08-16-2010 05:28 AM
So I've got my envy, quite pleased with it except for some minor flaws like the buttons being incredibly weak (I use it for work and after the first week of use 3 buttons fell off because the plastic cracked in them), and the touchpad with it's enable/disable feature.
The buttons were fixed by a repair shop, so that's "ok" I guess, but the touchpad is where my issues lie;
It will randomly disable, I know it says linger your finger on the top left for a few seconds then remove to enable/disable, but this only appears to work when it feelsl ike it (aka; whenever it's least convenient for me).
Is there any way to disable the feature that lets you linger to enable/disable it, this would be awesome as I always use the touchpad any way... that being said, it just disabled again while I was writing this, because I tapped the touchpad 4 times (failed doubleclick tap)... it's either too sensitive, or not sensitive enough, and it appears to disable the touchpad in such a way you can't enable it again if it's disabled?
08-16-2010 11:14 AM
One way is to uninstall the Synaptics software, the touchpad will still work but won't have the advanced features, which may not be what you want.
If you updated the touchpad software at any time I suggest you install the original Synaptics software to see if it cures the problem, it might be found in C:\SwSetup\Drivers\Touchpad
If you cannot find it there, go here
choose your System then choose software-driver downloads, then choose your OS, see if they have older versions of the Synaptics software available for download. (see "Previous versions available")
If you have an older Synaptics version installed, try the latest version on the downloads site.
05-10-2012 09:58 PM
(I do that sometimes) but you can try this:
go to your synaptics clickpad/touchpad settings >
and then look for "SmartSense" >
double click on it (or the config icon next to the ? question mark) >
you can adjust your smartsense settings from "Off" to "Max" >
I find that sometimes its too sensitive too! so I've adjusted it to my liking. or you can just turn it off lol
there's lots of settings there that will help too. I moved the mouse zone up more so that the left click buttons wont bother as much too.
07-02-2012 10:21 PM
HP Envy 15
Is there anyway to disable the very bright red light when the touchpad is turned off.
I like turning off the touchpad when I use an external mouse. The red light that signals that the touchpad is on is very bright and quite annoying. Is there anyway to turn it off when the touchpad is off other than sticking some chewing gum in the hole (just kidding, of course)?
01-27-2016 11:04 PM
01-28-2016 12:20 AM
Please someone help me I'm losing my mind. I'm simply trying to remove the black bottom of my envy 15 and I've removed every screw imaginable and it still won't come off. It sticks at wash of the thinner corners opposite the hinges. I can't figure this out for the life of me
Imconfused2, are you still needing help taking the laptop apart?
I will be glad to help.
It will be helpful for me if you do two things.
1. Give us the full model number for your HP 15 so we can find the right manual.
2. Start a new thread for your specific problem.