07-30-2009 07:50 PM - edited 07-30-2009 08:55 PM
I've had the same problem as others this week with regards to the wireless adapter and connectivity. My PC is a Pavillion dv9429us. I noticed the timing of the WiFi not working coincided with the automatic install/update of Internet Explorer 8. I decided to revert back to IE 7 and then reinstalled the WiFi driver from the HP site and lo-and behold...I've had a wireless connection for almost an hour now.
For more info on reverting back to Internet Explorer 7, visit http://support.microsoft.com/kb/957700/en-us
To determine the driver you need to install, use the troubleshoot feature on the HP site. Mine was a Broadcom.
There is also a link on the troubleshoot site regarding a recall for a host of HP products, and one of the issues with the recall is the wireless connectivity problem we're all experiencing. If your PC is included in the recall (mine is) you can send it back to HP and they will repair it free of charge. A toll free number for more info is provided. The recall information is listed under Support & Drivers. Go through the troubleshoot process (type in your product number) and click go. On the next page under Alert, click on "Click here to determine if your notebook is eligible for free repair." All details are listed, including a toll free number.
I hope this fix works for others (and who knows...it might be a temporary fix). BTW, I'm not an IT person, I just thought I'd give this a try and it happened to work.
08-01-2009 11:12 AM
I simply went into the BIOS and ENABLED the Network Adapter and Boot Enabled NtwkChanging wireless settings
● Computer Setup utility ● Device Manager ● LAN/WLAN Switching (select models only) ● Wireless button ● Windows Mobility Center (Windows Vista only) ● Wireless Assistant NOTE
The settings for all of these items must be enabled and turned on before the power to the integrated wireless device can be turned on.
A device can be turned off, disabled, turned on, or enabled. It can have any one of these settings or a combination of settings. For example, for a device to work properly, it must be both turned on and enabled. When a device is turned off, no power is provided to the device. On the other hand, a device that is turned on and disabled has power but has been made nonfunctional. Disabling a device frees the resources that were allocated to that device. Turning off a device removes power from the device.Method Settings Computer Setup utility Enabled/disabled Device Manager Enabled/disabled LAN/WLAN Switching Enabled/disabled Wireless button Enabled/disabled Wireless Network Turned on/turned off Wireless Assistant Turned on/turned off WWAN connection application Turned on/turned off Removing the primary battery Disabled WWAN
Go Green and Recycle.
There, is that better? It worked for me.
08-02-2009 10:47 AM
08-02-2009 11:13 AM
An update to my original message above. The fix was only temporary. I am now without wireless again. The BIOS is fine, but the Broadcon driver will not stay installed. I contacted HP and my laptop will be repaired under the recall listed in my original message. At this point, I don't want to continue doing the "quick fixes" over and over if I can get it fully repaired at no cost.
If you call to take advantage of the recall's free repair service, be prepared to spend about 30 minutes on the phone with an HP representative to get the repair authorized. A pain, I know, but better than continuing to deal with crappy, sporadic wireless.
- HP PCs - Troubleshooting Wireless Network and Internet (Windows 10)
- Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
- Troubleshooting Wireless Network and Internet (Windows 8)
- HP PCs - Using Bluetooth Devices (Windows 10, 8)
- HP PCs – Computer Stops Responding or Becomes Very Slow After Connecting to the Internet (Windows 10, 8)