Proliant Microserver G7 N54L problem no display

[hedi0058]

I just bought a HP micro server.

I first started it, the server booted normally (the HP logo then server was looking for device to boot from).

I turned off the server and opened it to add RAM.

Since then (from the seconf boot) there is no display from server (even after removing the RAM).

When I start the server the led is first orange then it turns to blue but there is no display !

I tried to clear the cmos, but nothing changed.

Can you please help me telling me what should I do.

Thanks

[Paul_Tikkanen]

Hi:

You may also want to post your question on the HP Business Support Forum -- Proliant Servers section.

http://h30499.www3.hp.com/t5/ProLiant/ct-p/proliant

[hedi0058 · Accepted solution]

Thanks.

BTW , the problem was solved. It was a problem with the vga cable (not well connected). Sorry for disturbing.

[Paul_Tikkanen]

You're very welcome.

Glad it was something simple.