How to put a key back into place (2321 Views)
Reply
Student
simpsonm2010
Posts: 1
Registered: ‎04-23-2011
Message 1 of 2 (2,321 Views)

How to put a key back into place

I read another post reply about how to put a key back into place but my laptop (G42-415DX Notebook) is nothing like the one that was showed in the answer. I need to know how to put a key back on for this model.

Professor
Pankay
Posts: 2,032
Registered: ‎03-19-2011
Message 2 of 2 (2,313 Views)

Re: How to put a key back into place

Step1

 

Gather all the pieces of the key. Most of the time when a key pops off from laptop, it comes off in 3 separate pieces: the key pad, the frame and a small piece that fits into the frame.

 

Step2

 

Place the frame flat and slip the small square middle piece into the slots on the sides of the frame. Slide the middle piece in diagonally so you have a frame with the middle piece pointing up in the middle of the frame. The middle piece has an "O" in the middle.

 

Step3

 

Put the frame on the keyboard in the space where the key popped out. Slide the piece in gently to avoid damaging the laptop's keyboard. There are tiny clips to hold the frame in place. Pop the frame into the clip. Do not press down hard.

 

Step4

 

Slide the tabs of the key pad into the slots on the frame. Start with the inside and then press the other side down.

||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//

||-If my answer solved the problem please mark the topic as the accepted solution-||
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation