This HP Community is for Customer to Customer Product Support. First Time Here? Check Out Videos on How to Search, Register, Post and More.

Re: Startup Black Screen and Beeps, HELP, pls (4338 Views)
Reply
Honor Student
techmoron
Posts: 2
Registered: ‎01-05-2009
Message 1 of 4 (5,351 Views)
Accepted Solution

Startup Black Screen and Beeps, HELP, pls

I have a HP Pavilion zv5410. When I turn it on it has a black screen and it beeps (1-2-2). I've gone on some sites about this but don't really understand what is going on.

 

I put new RAM in because I was told by a techie that it was usually the RAM going bad, but this didn't help. I can't do anything with the BIOS because I can't even get a screen to enter info, even with an external monitor.

 

I was told that I could get the data off my hard drive with a hard drive enclosure kit. I bought the Rocketfish 2.5 inch enclosure kit but it has a different connecter (for individual pins where mieare solid "pins" that slide down into the laptop connector).

 

Any ideas or suggestions. I would appreciate any help. :smileysad:

 

Thanks All,

K

Please use plain text.
Provost
CherylG
Posts: 16,435
Registered: ‎11-12-2008
Message 2 of 4 (5,378 Views)

Re: Startup Black Screen and Beeps, HELP, pls

Your hdd has an adapter over the pins that slides off.Remove it and it should fit in the enclosure.

******Clicking the White Kudos star on the left is a way to say Thanks!.******
**Clicking Accept as Solution on a Reply that solves your issue helps others who are searching**

++You must be the originator of thread to see the option Accept as Solution++
Please use plain text.
Honor Student
techmoron
Posts: 2
Registered: ‎01-05-2009
Message 3 of 4 (5,189 Views)

Re: Startup Black Screen and Beeps, HELP, pls

It worked!!!  I feel so stupid for not trying to see if the plastic piece came off.  Thanks so much for the help!

 

Karen 

Please use plain text.
Student
silence
Posts: 1
Registered: ‎03-24-2009
Message 4 of 4 (4,338 Views)

Re: Startup Black Screen and Beeps, HELP, pls

 I have totally back screen and the switch on the front edge of computer is orange even as I move it from left to wright ???
Please use plain text.