Avery Business Card Printing: "WANDERING MARGIN PROBLEM- upper margin issue [ Edited ]

[econobiker]

Solve this one printer experts:

Welcome to Printer Expert Days April 20-21st

huh where are the experts now!!!!

[tomwhite55]

Thanks for all of the information.  Business cards are a great way to present yourself and what you stand for. [text removed]

Thanks again for the community contribution!

[Dragonscribe]

I agree it seems to be something about the way the printer grabs the paper -- I have the same problem with Avery 5193 DVD labels, and it's intermittent suggesting even more strongly that it's variation in feeding.

Am I just too, too cynical in suggesting that the more we all burn ink trying to figure this out, the more money HP makes?

[steve54b]

Set the paper type to  "HP Photo Greeting Card"!  I can't guarantee it will work for everyone in all situations, but when I use it to print on the Avery 28877 "White Two-Side Printable Clean Edge Business Cards", I don't get the creepy margin creep.

hope this helps!

[JoeKahl · Accepted solution]

I am suffering from this WANDERING MARGIN PROBLEM too.  I

have the HP Officejet Pro L7680 All-in-One printer, Windows XP, Office 2007, Microsoft Publisher, Avery 8873 template.  I have done everything right.  Still my business cards are printing perfectly on plain paper and they print right from the top on the expensive business card stock.  It is very frustrating. 

I have tried the ideas suggested here.  I have tried the Thick Paper, the Photo Greeting Card, the Best quality and the Normal quality.  I have tried lightly holding my finger on the card as it feeds in.  I tried slightly bending the sides of the card up.  I get a successful print one-out-of-every-five.  I am so freakin disappointed I could scream.  I have been laid off and I have networking and interviews to attend and I need my business cards!

The people at Avery are useless.  They wanted me to call Microsoft!  I kept telling "Meg" that the alignment was fine for plain paper and incorrect with Avery business card stock.  I asked her if she was familiar with HP printer settings for thick card stock.  She kept telling me to call Microsoft.  I wonder if she was actually an automaton who just cannot accept any responsibility.

I thought I bought the best brand printer.  I tried Brother brand.  They are really crummy.  I really expected HP to be better.

In the end I got some business cards that are acceptable.  But I wasted 80%!  If you compare them they are not all aligned the same.  With crappy capabilities like this I might just scrap my printer and contract the work at Office Depot.  Who needs all this aggravation?

Joe

[ctcks]

SOLVED! Try this fix! The key is to fool the printer software into thinking it's printing on plain, not expensive glossy or heavy weight paper.  http://h30434.www3.hp.com/t5/Other-printing-questions/Solved-All-in-Ones-Misalignment-on-Costco-or-H...

[wmbiklne]

I have the same problem printing Avery Business Cards with Template 8371.

I have the OfficeJet Pro 8000 with duplex automatic two side printing.

Using either Microsoft Word with the Avery Business Card Template 8371 or using Microsoft Publisher with the same setup, I get the same results.  The top and bottom margins are simply wrong (too small on the top, too large on the bottom) and the each card prints over the perforation lines on the card stock.  It doesn't matter what kind of paper I use, or what paper type I choose on the Printer Preferences, I get exactly the same result when I have the printer set to do automatic two side printing.  I have also checked the "Preserve :Layout" button and that only makes the problem worse.

I have tried adjusting the margins, to no avail.

The only way I can make it work is to st the "Two sided printing" to "Off".  Print just the front page.  Remove the paper/card stock from the printer.  Put it back into the printer. and print the second page.  That works correctly every time!!!!

Again, it does not matter what kind of paper I use or what kind of paper type I choose in the Printer Preferences.

The Printer Software simply does not work correctly.  I had an HP DeskJet 6122 with duplex two sided printing, for years.  I could print business cards on it correctly, every time.

This is not a Microsoft Publisher or Microsoft Word software problem!!!  Period!!!!  If it was, then I wouldn't have been able to print correclty on the HP DeskJet 6122.

Hewlett Pachard, read this, Help!!!!!!!!!

Avery, if you are able to help, that would be great.

W. Michael Biklen

{Removed for privacy}

[PCLindgren]

This is definately an HP printer problem.  It worked fine on my Kodak printer.  I did try the suggestion of telling the printer that I was using photo paper.  It worked, but only if I used print pquality best, so it was very slow.