HP Support Forums
Join in the conversation.
03-25-2012 05:02 PM
I've had my CP1525nw for a couple of years. Been good. Today I noticed some color
shadowing on an image. To demonstrate the problem, I printed 6 1" circles;
red, green, blue, yellow, cyan, and magenta. The blue circle has a light magenta
shadow about .05" to the lower right.
I turned the printer off, deleted and re-installed the drivers with no improvement.
I have done cleaning and calibration. I'll appreciate a response. Thanks, Dave
Solved! Go to Solution.
03-25-2012 06:36 PM
I have read that this can be caused by a toner cartridge that is low. Replacing the low cartridge may allow the alignment to complete properly.
Bob Headrick, Microsoft MVP Windows Expert - Consumer, HP Expert
I am not an employee of Microsoft or HP, I am a volunteer posting here on my own time.
<---- If my answer was helpful please click the "Kudos" star to say "Thank You".
If your problem is solved please click the "Accept as Solution" button ---->
04-03-2012 11:15 AM
Thank you. My toner wasn't low, but it wasn't "genuine".
I replaced all toners with "genuine" and the colors became aligned.
Then I replaced back to my "3rd party" toners and the colors are still aligned.
(for how long?) Thanks again, Dave