This HP Community is for Customer to Customer Product Support. First Time Here? Check Out Videos on How to Search, Register, Post and More.

Does anyone know what software is needed for an HP A799 POS receipt printer? (1909 Views)
Reply
Honor Student
Gileon7
Posts: 4
Registered: ‎08-09-2011
Message 1 of 6 (1,909 Views)
Accepted Solution

Does anyone know what software is needed for an HP A799 POS receipt printer?

I'm trying to use the A799 receipt printer to open the register drawer. The software I have does not have a configuration for this, so I'm guessing I do not have the right software. It prints fine, just doesn't open the drawer.

Please use plain text.
Student
bregmer
Posts: 1
Registered: ‎08-18-2011
Message 2 of 6 (1,871 Views)

Re: Does anyone know what software is needed for an HP A799 POS receipt printer?

Hello,

 

You may need to reinstall one or more of the following device drivers:

 

  • HP Integrated Cash Drawer OPOS Driver
  • HP USB Receipt Printer firmware Upgrade
  • Common Control Object (CCO) driver

You can find these drivers here : http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5081353&...

Please use plain text.
Student
Wrenae
Posts: 1
Registered: ‎08-19-2011
Message 3 of 6 (1,865 Views)

Re: Does anyone know what software is needed for an HP A799 POS receipt printer?

OMG Thank you. Spent over an hour trying to find this. Horrible documentation on the site for any POS items. By the way, you need to set the length of the paper to 157" if you plan on printing anything beyond 36"....

Please use plain text.
Honor Student
Gileon7
Posts: 4
Registered: ‎08-09-2011
Message 4 of 6 (1,857 Views)

Re: Does anyone know what software is needed for an HP A799 POS receipt printer?

Thanks,

 

I'll try the CCO driver, that is the only one I have not reinstalled.

Please use plain text.
Honor Student
Gileon7
Posts: 4
Registered: ‎08-09-2011
Message 5 of 6 (1,850 Views)

Re: Does anyone know what software is needed for an HP A799 POS receipt printer?

I reinstalled the CCO driver, but the drawer still does not open when the printer prints a receipt. The drawer will open when using the HP testing software.

 

Any other ideas?

Please use plain text.
Honor Student
Gileon7
Posts: 4
Registered: ‎08-09-2011
Message 6 of 6 (1,841 Views)

Re: Does anyone know what software is needed for an HP A799 POS receipt printer?

I found the solution!

 

SOLUTION:

Download and install HP USB Receipt Printer Firmware Upgrade (sp34185) from the following URL: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ir-454...

 

Finish the printer installation by completing the following steps:

1. Go to Start > Settings > Control Panel > Printer and Faxes > Add printer .

2. During the Add Printer Wizard process, you will be asked to select a port. In the drop-down list, select a USBxxx (Virtual Printer Port) port.

3. Browse to the location where the printer files are located, and select TPG A794 CD#1 Full and install the printer.

4. Once the test page is printed the drawer will open automatically. NOTE: The TPG A794 CD#1 version generates a pulse to cash drawer 1 after each document, opening the cash drawer.

 

Even though this is listed as a solution for the RP5000, it worked perfectly on the RP3000 using the HP A799 printer.

 

NOTE:

The TPG A794 CD#1 version generates a pulse to cash drawer 1 after each document, opening the cash drawer.

Please use plain text.