This HP Community is for Customer to Customer Product Support. First Time Here? Check Out Videos on How to Search, Register, Post and More.

HP 6500 Office jet E709a - Black printer cartridge HP 920 not working (175045 Views)
Reply
Dean
Bob_Headrick
Posts: 11,993
Registered: ‎11-17-2008
Message 51 of 421 (4,255 Views)

Re: black ink not working

 


dstamps7 wrote:

I have a deskjet 5650.  After reading all the above suggestions. I soaked the cartridge etc., couldn't locate printhead, but where I could ink I cleaned (best I could reach) with a cotton and alcohol.  Still no black.  Next solution please.


The printhead on the Deskjet 5650 in included in the print cartridge, it is the platinum colored rectangle on the bottom of the cartridge. For this printer I would suggest you follow the troubleshooting steps here.

 

Bob Headrick, Microsoft MVP Windows Expert - Consumer.
<----   If my answer was helpful please click the "Kudos" star to say "Thank You".
        If your problem is solved please click the "Accept as Solution" button ---->
Please use plain text.
Student
e_massimini
Posts: 1
Registered: ‎02-13-2011
Message 52 of 421 (4,227 Views)

Re: black ink not working

[ Edited ]

I am having the same problem with a 4550J. Bought this for my son a couple of years ago for college and it became unusable with black ink.  Did the QTIp cleanse, no progress. Any hope before I throw it into the recycle heap? OS is Vista, and we've spent close to $100 trying new cartridges to no avail. Cartridged are all HP.

Please use plain text.
Student
wherbine
Posts: 2
Registered: ‎02-15-2011
Message 53 of 421 (4,243 Views)

Re: black ink not working

Where are the printer rollers or discs and how do I clean them?

Please use plain text.
Student
tamnchadatl
Posts: 1
Registered: ‎02-16-2011
Message 54 of 421 (4,198 Views)

Re: black ink not working

Just bought Photosmart D110 from Sam's last night and am having same problem.  Cannot allign heads due to black not printing on alignment page.  Advice?

Please use plain text.
Student
glenteskey
Posts: 1
Registered: ‎02-16-2011
Message 55 of 421 (4,164 Views)

Re: blank ink not working

 black cartrige is full but prints faint, and I know there is a way to clean it

Please use plain text.
Honor Student
tkfrosts
Posts: 2
Registered: ‎02-16-2011
Message 56 of 421 (4,209 Views)

Re: black ink not working

Hi, I have a Photosmart C6180 with XP op sys.  I too have the dark blue cartridge I replaced and it still shows it is empty.  I have an error report saying to replace the cart. or it cannot print.  Can you help me too ???? Please !!   Thanks, Tom

Please use plain text.
Student
LCroz
Posts: 1
Registered: ‎02-16-2011
Message 57 of 421 (4,196 Views)

Re: black ink not working

I have an OfficeJet J4580, and just bought a high-yield refill black cartridge from Cartridge World (read through the download and it didn't mention my problem).  Went to print a 4-page black and white document full of legalese (i.e., small print) and on page 3 the black ink gradually turned to green, and all of page 4 was in green.

 

Went to re-print pages 3 and 4, and it did the same thing 3/4 of the way through page 4 (which in this case was the second of the 2 pages being printed).

 

I seem to recall cleaning the print heads uses up a lot of ink so I thought I'd check the forum first in case that is not generally believed to be helpful.

 

Hope I luck out and you (or someone else) have seen this before as well!!

 

Many thanks.

Please use plain text.
Honor Student
NoddyFrog
Posts: 2
Registered: ‎02-20-2011
Message 58 of 421 (4,098 Views)

Re: black ink not working

Hi, Ive been through this thread & not seen a similar problem to mine.

 

HP Photosmart C4600 

 

Black does not seem to work when i try to print Photographs,

If i print a document (text) it seems fine.

 

When printing pictures however it seems to use the red/cerise ink in the image where it should be black :smileysurprised:

 

If I remove the colour cartridge it will print Black - on what the display says is 'Back-up ink mode' ?

(having used a lot of coloured ink testing &)

 

- I've not altered any settings

Checked the print options & Ink levels, cleaned, Re-installed Software...

No change

 

I've been very pleased with the units operation, but any advice or suggestions would be very much appreciated please

 

Thanks,

Please use plain text.
Student
nicolaengland
Posts: 1
Registered: ‎02-21-2011
Message 59 of 421 (4,013 Views)

Re: blank ink not working

Have put a new ink but still not printing

Please use plain text.
Student
khuber
Posts: 1
Registered: ‎02-22-2011
Message 60 of 421 (4,001 Views)

Re: black ink not working


Shell741 wrote:

My blck ink is not out, the panel shows that it's about 2/3 full. But it won't print anything black. I turned the printer off and back on, and I remmoved the ink cartridge and put it back in. I don't know what else to do.


Perfecto!! The hot water method worked.


Shell741 wrote:

My blck ink is not out, the panel shows that it's about 2/3 full. But it won't print anything black. I turned the printer off and back on, and I remmoved the ink cartridge and put it back in. I don't know what else to do.


 

Please use plain text.