Question
Reply
 
Student
marcshi
Posts: 1
Member Since: ‎01-05-2010
Message 1 of 2 (1,825 Views)

OJ Pro 8500: I can't print legal size or make copies of legal size documents

I have not found a combination of settings which will result in a legal size print out or copy.

 

Any help?

Professor
007OHMSS
Posts: 2,530
Member Since: ‎08-12-2009
Message 2 of 2 (1,811 Views)

Re: OJ Pro 8500: I can't print legal size or make copies of legal size documents

Okay, first of all, you need to have legal size paper in the main tray. If you haven't done this, the front white tray part pulls out further to facilitate legal size paper in the input tray.

 

For copying legal size to legal size paper, follow these instructions:

 

You can set the paper size on the device. The paper size you select should match
what is loaded in your input tray.

*To set the paper size from the device control panel (color display)
1. Touch COPY and then select Copy Paper Size.
2. Select the appropriate paper size.
3. Press START COPY Black or START COPY Color.
*To set the paper size from the device control panel (two-line display)
1. In the Copy area, press COPY repeatedly until Copy Paper Size appears.
2. Press the right arrow, , until the appropriate paper size appears, and then press OK.
3. Press START COPY Black or START COPY Color.

 

For printing from Windows, use these instructions:

 

*Change settings from an application for current jobs (Windows)
To change the settings
1. Open the document that you want to print.
2. On the File menu, click Print, and then click Setup, Properties, or Preferences.
(Specific options may vary depending on the application that you are using.)
3. Select the appropriate printing shortcut,y and then click OK, Print, or a similar
command.

*Change default settings for all future jobs (Windows)

To change the settings
1. Click Start, point to Settings, and then click Printers or Printers and Faxes.
     - Or -
    Click Start, click Control Panel, and then double-click Printers.

    NOTE: If prompted, enter your administrator password.

2. Right-click the printer icon, and then click Properties, General Tab, or Printing
Preferences.
3. Change the settings that you want, and then click OK.

 

007OHMSS

I was a support engineer for HP.

If the advice resolved the situation, please mark it as a solution. Thank you.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation