HP Support Forums
Join in the conversation.
10-19-2009 09:49 AM
My prints no longer match my monitor, a calibrated Eizo CE2410. (Previously, i.e. for months, I have a virtually perfect match except for some minimal, out of gamut colors.) I have run all the 7960 tests, color calibration, calibration, cartridge cleaning, etc. Everything looks great including the test page/print. I did read on another site that there could be problems with printer profiles going bad. Are there any suggestions along that line or other possible remedies??? Note I have replaced ALL my cartridges at no small, additional expense, when perhaps only one was getting only somewhat low.
One other thing. I had a previous issue with what appeared to be a solarization effect. I ran all the tests as noted above. I may also have reinstalled the driver although that didn't have an effect (at least not immediately). In running the tests I did see a streak in one color. I cleaned the cartridges (noted above) and same story-- the streak was gone but not the solarization. I then calibrated the color again and everything worked... the last time I printed which was about a week ago. However, although the problem now manifests itself in a different manner (my blacks have a reddish hue), I seem to be back at Square One!