HP Support Forums
Join in the conversation.
01-09-2010 02:56 AM
I had the same problem of printing up side down by duplex printing on the HP 7310 Ethernet connected printer in Windows 7 32 version.
I followed the instructions in the PDF and applied the patch and the problem was solved.
Thanks for the posting of this information.
01-09-2010 05:17 PM
When printing automatic duplex the document prints smaller than actual size. That is, a Word 2007 document with a half inch top margin prints as if the top margin is one inch. C309a, Win 7 64-bit, wireless. Steve H
01-09-2010 08:56 PM
I am using HP PSC 1510 All-in-One Series connected through a usb to a Windows 7 laptop
I have a problem to print in both sides.
Usually, i simply choose "manually" in the "print on both sides" and it will print the odd page first.. pop up a dialog box telling me to switch the paper upside down.. and continue printing the even page..
However, recently.. even when i have chosen "manually", it prints the odd page and keep continuing with the even page.. the pop up dialog box does not come out anymore..
You might try the solution here.
Bob Headrick, Microsoft MVP Windows Expert - Consumer, HP Expert
I am not an employee of Microsoft or HP, I am a volunteer posting here on my own time.
<---- If my answer was helpful please click the "Kudos" star to say "Thank You".
If your problem is solved please click the "Accept as Solution" button ---->
01-10-2010 05:37 PM
I have a CP1160 printer running Windows Ultimate 64-bit. I only get a manual duplex option for printing. Under Installable Options I only get options
"allow manual duplexing" &
"activate hardware auto off feature"
I get no option for Installable Options, set the "Two Sided Duplex Unit" to installed, OK. What can I do to get the auto duplex function?
01-10-2010 08:34 PM
Hi. When printing more than one page with manual duplex, our HP C4780 does not finish feeding the first page. It just prints half the first page then waits until you click "continue" in the duplex dialog, but then it pulls a new sheet for the second page. Running Windows 7.
01-11-2010 10:50 AM
I have the officejet 8500 premeir and am having the same issues someone else had, when printing double sided the printer automatically gives a 1 inch margin on the left side, and is actually "scrunching" the whole document, narrowing it to fit into the remaining 10 inches, rather than 11... It is like the printer goes to a 8.5 by 10 inch setting instead of 8.5 by 11 inch setting. i have tried this in so many different programs, am still going crazy. Currently using windows vista and publisher to print. thanks for any help!
01-11-2010 01:34 PM
When printing automatic duplex the document prints smaller than actual size. That is, a MS Word 2007 document with the top and bottom margins set to a half inch, the printer prints the document as if the top and bottom margins are approximately one inch. The same problem occurs in MS Publisher 2003. C309a, Win 7 64-bit, wireless. Steve H
01-12-2010 03:35 PM
I'm having the same problem with shrinking top and bottom margins that SFH is having when auto-duplexing. Along with Word documents, this occurs when I print images or PDF files. I also had this problem with Windows XP. My current configuration is C309a wireless, Windows 7 64bit.
01-12-2010 06:42 PM
I just bought and installed HP 8500 A909a printer on Vista. The problem is that when duplexing the pages come out shrunk. Also the first page come down with greater top margin.
I would appreciate a response on how to fix this problem. Thanks for your help.