-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- Re: Officejet pro 8600 outfeed tray
Create an account on the HP Community to personalize your profile and ask a question
09-09-2012 05:47 PM
How do you pull out the outfeed tray to hold legal size paper.
Solved! Go to Solution.
Accepted Solutions
09-11-2012 09:51 AM
Hi columbia530,
You should be able to extend the output tray to the legal position. If it seems to be stuck you may need to push it in, and then out a couple times for it to release. Make sure and be careful when pulling on the tray not to break the flap off the end of the output tray.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
09-11-2012 09:51 AM
Hi columbia530,
You should be able to extend the output tray to the legal position. If it seems to be stuck you may need to push it in, and then out a couple times for it to release. Make sure and be careful when pulling on the tray not to break the flap off the end of the output tray.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
09-17-2012 07:05 AM
Hi columbia530,
Glad to hear you were able to get the tray extended. Have a wonderful day.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
09-17-2012 08:09 AM
Hi columbia530,
Thank you for the feedback on the tray being hard to extend. I will forward this information to our teams.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
08-16-2013 07:08 AM
Well, the cute little flap on the end of my outfeed tray DID snap off, thanks to a well-placed attack from an office chair. Where can I get a replacement tray, with flap, so my printed pages don't shoot all over the universe?
08-19-2013 07:29 AM
Hi RickMes,
You can visit the HP Parts store at the link below or you can contact phone support.
HP Parts Store - Buy Certified HP Genuine Replacement Parts
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
03-20-2014 07:00 PM
Go the same problem with my OfficeJet Pro 8600e AIO, broke off the flip-up stop on the output tray. Any luck as far as what company can provide a replacement? The HP does not mention this particular part as one "User replacable part" on their web page. Probably due to the fact that this particular part already comes installed/attached to the printer when I puchased it in 2013. Any help as far as proper part number and/or supplier is appreciated
Didn't find what you were looking for? Ask the community