Officejet pro 8600 outfeed tray (939 Views)
Reply
Tutor
columbia530
Posts: 15
Registered: ‎08-25-2012
Message 1 of 13 (939 Views)
Accepted Solution

Officejet pro 8600 outfeed tray

How do you pull out the outfeed tray to hold legal size paper. 

Provost
pcwizard
Posts: 11,485
Registered: ‎12-31-2009
Message 2 of 13 (921 Views)

Re: Officejet pro 8600 outfeed tray

Hi columbia530,

 

You should be able to extend the output tray to the legal position. If it seems to be stuck you may need to push it in, and then out a couple times for it to release. Make sure and be careful when pulling on the tray not to break the flap off the end of the output tray.

 

IMAG0115.jpg

I am an HP employee.

Say Thanks by clicking the Kudos Star in the post that helped you.

Please mark the post that solves your problem as "Accepted Solution"
Tutor
columbia530
Posts: 15
Registered: ‎08-25-2012
Message 3 of 13 (906 Views)

Re: Officejet pro 8600 outfeed tray

It took a bit of doing, but it finally extended.

Thanks.

Provost
pcwizard
Posts: 11,485
Registered: ‎12-31-2009
Message 4 of 13 (859 Views)

Re: Officejet pro 8600 outfeed tray

Hi columbia530,

 

Glad to hear you were able to get the tray extended. Have a wonderful day.

I am an HP employee.

Say Thanks by clicking the Kudos Star in the post that helped you.

Please mark the post that solves your problem as "Accepted Solution"
Tutor
columbia530
Posts: 15
Registered: ‎08-25-2012
Message 5 of 13 (855 Views)

Re: Officejet pro 8600 outfeed tray

thanks. this seemed the logical solution, it was just very much stuck.
Provost
pcwizard
Posts: 11,485
Registered: ‎12-31-2009
Message 6 of 13 (853 Views)

Re: Officejet pro 8600 outfeed tray

Hi columbia530,

 

Thank you for the feedback on the tray being hard to extend. I will forward this information to our teams.

I am an HP employee.

Say Thanks by clicking the Kudos Star in the post that helped you.

Please mark the post that solves your problem as "Accepted Solution"
Student
RickMes
Posts: 1
Registered: ‎08-16-2013
Message 7 of 13 (617 Views)

Re: Officejet pro 8600 outfeed tray

Well, the cute little flap on the end of my outfeed tray DID snap off, thanks to a well-placed attack from an office chair. Where can I get a replacement tray, with flap, so my printed pages don't shoot all over the universe?

Provost
pcwizard
Posts: 11,485
Registered: ‎12-31-2009
Message 8 of 13 (608 Views)

Re: Officejet pro 8600 outfeed tray

Hi RickMes,

 

You can visit the HP Parts store at the link below or you can contact phone support.

 

HP Parts Store - Buy Certified HP Genuine Replacement Parts

 

Please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.

http://www.hp.com/cgi-bin/hpsupport/index.pl

I am an HP employee.

Say Thanks by clicking the Kudos Star in the post that helped you.

Please mark the post that solves your problem as "Accepted Solution"
Student
Debbie64
Posts: 1
Registered: ‎03-14-2014
Message 9 of 13 (150 Views)

Re: Officejet pro 8600 outfeed tray

I have called and asked to order this part, they refer me to 2 different comapnies and NO one has this available. Sucks when the printer is 8 months old.

Honor Student
Roadking1970
Posts: 3
Registered: ‎03-20-2014
Message 10 of 13 (121 Views)

Re: Officejet pro 8600 outfeed tray

Go the same problem with my OfficeJet Pro 8600e AIO, broke off the flip-up stop on the output tray. Any luck as far as what company can provide a replacement? The HP does not mention this particular part as one "User replacable part" on their web page. Probably due to the fact that this particular part already comes installed/attached to the printer when I puchased it in 2013. Any help as far as proper part number and/or supplier is appreciated

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation