Re: how do i turn off alignment? (968 Views)
Reply
Honor Student
jimsims
Posts: 1
Registered: ‎02-23-2013
Message 51 of 92 (1,055 Views)

Re: how do i turn off alignment?

Currently locked in align reminder.  Done it several times, yet it keeps coming back.  Also, everytime I turn this HPAIO1315 off....it reprints the alignment page.....wasting ink as well as paper

Honor Student
Roysp
Posts: 1
Registered: ‎02-28-2013
Message 52 of 92 (1,027 Views)

Re: how do i turn off alignment?


pjpowers wrote:

everytime i put in a new cartridge it wants to re-align itself.  I want to have the choice of aligning or not, rather than having it automatically align and wasting expensive ink.  How can I accomplish this?

 

thanks



pjpowers wrote:

everytime i put in a new cartridge it wants to re-align itself.  I want to have the choice of aligning or not, rather than having it automatically align and wasting expensive ink.  How can I accomplish this?

 

thanks




Student
VIDD
Posts: 1
Registered: ‎03-13-2013
Message 53 of 92 (985 Views)

Re: how do i turn off alignment?

I have an HP Deskjet 3050A which I use with my laptop. I disconnect the USB and unplug it after every use, because there is no room for me to keep it out. It asks me to print and scan the alignment page every single time I plug it in to use. Can I change this?

Top Student
inventpeace
Posts: 15
Registered: ‎11-16-2012
Message 54 of 92 (976 Views)

Re: how do i turn off alignment?

Everytime i post this solution someone "appears" to be deleting it? (or maybe I just can't find it)..   you can skip alignment by hitting cancel button 2 or 3 times, then ok button, repeat until it says alignmene canceled, then proceed as normal.   Mine for some reason no longer asks for the alignment, maybe its got a time out for example after 25 canceled alignments in a row it quits asking? or maybe I changed something in the settings that causes it not to ask?   FYI: I leave the printer plugged in with power on it  and use a power surge protector to turn on the power to it, each morning i simply use the power surge strip outlet to turn on the power...SOoooo... it could be that if you dont' actually use the power on./off button on the printer that it will keep its current settings when you turn it off with the power surge outlet strip?    Best of luck !    GODSPEED !

Top Student
shinestardrc
Posts: 2
Registered: ‎03-14-2013
Message 55 of 92 (968 Views)

Re: how do i turn off alignment?

i HATE this stupid, paternalistic approach to doing business!!!!!  Your alignment process is a pain!  I have hated it ever since I bought my HP 4500.  PLEASE LISTEN!  I DO NOT NEED TO REALIGN EVERY TIME THE STUPID MACHINE RECONNECTS!

 

Since your company believes it knows so much more than its customers and it is nearly time for me to buy a new printer let me make it VERY CLEAR you will not be the company I would EVER CHOOSE AGAIN!

 

Just tell people how to disable what is a very, very irritating feature of your otherwise good printer...otherwise learn that if you don't serve your customers you WILL LOSE your customers!!!!!!!!

PhD Student
OrnahP
Posts: 2,881
Registered: ‎12-05-2012
Message 56 of 92 (964 Views)

Re: how do i turn off alignment?

shinestardrc

 

Thank you for visiting the HP Support Forums. Just a reminder that this is a peer-to-peer community of HP customers, and not a venue to contact HP directly. Most of the users here are consumers like yourself who are offering solutions because they like to help others, and any HP employees you see are here on their own capacity and not representing the company.

If you have additional or direct feedback for HP about their products or services, or questions about repair, you can use the link below for contact information.

http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

If you have other questions and concerns about using the forum, please feel free to send me a private message.


-----------------------------------------------------------------------------------

OrnahP
HP Support Forums Moderator


:smileyhappy: Clicking the "Kudos Star" to the left is a great way to say thanks!
:smileyhappy: When your problem has been solved, accept the solution by clicking "Accept as Solution" to help other members in the future!
Rules of Participation

Top Student
shinestardrc
Posts: 2
Registered: ‎03-14-2013
Message 57 of 92 (959 Views)

Re: how do i turn off alignment?

Thank you...I went on to the site you referred me to which in absolutely no way is soliciting any consumer feedback whatsoever.  There was no place on that site to talk to the company about anything they didn't want to talk about...typical of the kind of comments that I've seen on this "peer to peer" site

Provost
Bob_Headrick
Posts: 14,063
Registered: ‎11-17-2008
Message 58 of 92 (951 Views)

Re: how do i turn off alignment?


inventpeace wrote:

Everytime i post this solution someone "appears" to be deleting it? (or maybe I just can't find it)..   you can skip alignment by hitting cancel button 2 or 3 times, then ok button, repeat until it says alignmene canceled, then proceed as normal.   Mine for some reason no longer asks for the alignment, maybe its got a time out for example after 25 canceled alignments in a row it quits asking? or maybe I changed something in the settings that causes it not to ask?   FYI: I leave the printer plugged in with power on it  and use a power surge protector to turn on the power to it, each morning i simply use the power surge strip outlet to turn on the power...SOoooo... it could be that if you dont' actually use the power on./off button on the printer that it will keep its current settings when you turn it off with the power surge outlet strip?    Best of luck !    GODSPEED !


You can find your posts by clicking on your username.  Duplicate posts are not helpful and are generally deleted.

 

I would suggest *not* using an external power switch to turn off the printer.  Doing so will use more ink and shorten the life of the printer as the printer will do a more agressive service cycle when it is turned on from an external switch.  The printer should always be plugged into a live outlet.  Turning the printer off from an external switch can also leave the printheads out of the capping station, causing the printhead to dry out.

Bob Headrick, Microsoft MVP Windows Expert - Consumer,  HP Expert

I am not an employee of Microsoft or HP, I am a volunteer posting here on my own time.

<----   If my answer was helpful please click the "Thumbs Up" to say "Thank You".

        If your problem is solved please click the "Accept as Solution" button ---->

Top Student
buzbuz
Posts: 8
Registered: ‎08-23-2010
Message 59 of 92 (844 Views)

Re: how do i turn off alignment?

At last I managed to disable the alignment option for a Photosmart C4280, just into the printer menu there's a bypass option, press ok, for the pc warning messages disable it in the stratup ...job done

Top Student
buzbuz
Posts: 8
Registered: ‎08-23-2010
Message 60 of 92 (863 Views)

Re: how do i turn off alignment?

[ Edited ]

There's a bypass option in the printer menu, if you select ok you disable it forever...

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation