How to connect my HP Officejet 4500 G510n-z to work wireless. (28872 Views)
Reply
Student
WhiteLT1Vette
Posts: 1
Member Since: ‎07-14-2012
Message 11 of 18 (8,059 Views)

Re: How to connect my HP Officejet 4500 G510n-z to work wireless.

I ran the installation to wireless network on my PC and on the printer however I am still unable to connnect to my wireless network.

Provost
PrintDoc
Posts: 20,288
Member Since: ‎08-19-2009
Message 12 of 18 (8,047 Views)

Re: How to connect my HP Officejet 4500 G510n-z to work wireless.

Download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...

What does it say?

________________________________________________________
Say thanks by clicking "Kudos" on the left in the post that helped you.

I am employed by HP
Student
DCMike
Posts: 1
Member Since: ‎10-06-2012
Message 13 of 18 (6,862 Views)

Re: How to install the driver to my HP Officejet 4500 G510n-z wireless.

How to install the driver to my HP Officejet 4500 G510n-z wireless.

Provost
PrintDoc
Posts: 20,288
Member Since: ‎08-19-2009
Message 14 of 18 (6,547 Views)

Re: How to install the driver to my HP Officejet 4500 G510n-z wireless.

Download and install the latest software for your printer from the "Support & Drivers" link at the top of this page.

________________________________________________________
Say thanks by clicking "Kudos" on the left in the post that helped you.

I am employed by HP
Student
bonnaventure
Posts: 1
Member Since: ‎07-24-2013
Message 15 of 18 (2,925 Views)

Re: How to connect my HP Officejet 4500 G510n-z to work wireless.

I have read the instructions  but following the PRINT test instructions. The print out  is not coming out, it remains in the a Q file to be printed,   I am unble to resume printing.  Thanks for your help

Provost
PrintDoc
Posts: 20,288
Member Since: ‎08-19-2009
Message 16 of 18 (2,911 Views)

Re: How to connect my HP Officejet 4500 G510n-z to work wireless.

What operating system?  How is the printer connected?  If to a network, what router?

________________________________________________________
Say thanks by clicking "Kudos" on the left in the post that helped you.

I am employed by HP
Student
SpencerNevin
Posts: 1
Member Since: ‎09-02-2013
Message 17 of 18 (2,515 Views)

Re: How to connect my HP Officejet 4500 G510n-z to work wireless.

OK, I've read through every forum I can find and haven't found a solution yet.  My laptop is running Windows 8.  I downloaded the updated HP software for installing this printer on windows 8, it goes through the whole set up but when it comes to the part about connecting wirelessly it doesn't find the printer.  The printer itself is connected to my network, (verified the printout from the printer, shows all is good.)  I also can log into my router and see that it is connected.  Btu windows 8 just wont recognize it.  I also tried installing the printer through Windows 8 using the add printer function rather than using the HP software, that doesn't work either.  I am at my wits end trying to get this to work.  Any help would be appreciated.  For some reason even though the printer is connected to my network, it just won't show up.  I even tried adding the printer manually by inputting the IP address assigned to it by my router....no luck.  Also it works fine when connected via USB cable.  Not sure if this would make a difference, but I have another HP printer 8150, that i installed and works fine with Windows 8....is it possible they can't both be installed???

Provost
PrintDoc
Posts: 20,288
Member Since: ‎08-19-2009
Message 18 of 18 (2,487 Views)

Re: How to connect my HP Officejet 4500 G510n-z to work wireless.

1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.

________________________________________________________
Say thanks by clicking "Kudos" on the left in the post that helped you.

I am employed by HP
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation