Photosmart D5463 problems printing over network [ Edited ]

[Barvinok]

Hi all.

Here's my setup: two identical computers with identical Win7 x64 on them, connected and working over Ethernet. One has Photosmart D5463 installed and working quite good. It is also shared over network for other computer. Latest driver software (including HP solutions center) is installed on both of them, downloaded fresh from hp.com.

Minor problem: for every printed document, Windows' printer status window indicates more pages printed than the document actually contained. For example, if I were to print 3 page document, status windows would show like 11/3 printed instead of 3/3 as normal printer would do. I could live well with it, if not for

Major problem: The second computer which uses the same printer over network, keeps popping "Genuine ink installed" window five to ten times per each printed page no matter if i tick [x] do not show or not. This is quite annoying, as I wish to pring few hundred pages document very soon. It also slows printing alot, because if I don't close "Genuine ink installed" window, printer on the first computer would stop printing and wait for my repeated "OK"ing.

What should I do?

[Barvinok]

Now, what helped to alleviate the minor problem is changing the Print Processor from hpzppw72 to winprint.

The major problem persists, however. Some attention from experts on this subject is still needed!

[Barvinok]

bump

[Barvinok]

bump