losing airprint connection

[JeroenT]

When i want to use airprint from my ipad to my HP photsmart 6510, i always have to shutdown en restart the printer before i can get connection. Somehow it seems to lose this connection. Wireless printing is never a problem from my laptop.

Does anyone know what to do.

[PrintDoc]

Let's set a static IP address  and external DNS for the printer:

- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.

Now, shut down the router and printer, start the router, wait, then start the printer.

After this you may need to redo 'Add a Printer' using the new IP address.

[JeroenT]

Thx printdoc, i Will try this and let you know.

[JeroenT]

I am sorry printdoc but AirPrint is still not working. Do you have any other suggestions?

[PrintDoc]

Yup.  What router are you using? Is its firmware updated?  Does the printer have a strong wireless signal?