-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Archived Topics
- Printers Archive
- Cleaning/Misprint Issue on CP 2025 Printer
Create an account on the HP Community to personalize your profile and ask a question
12-14-2015 09:02 AM
This will fix this issue with Misprint :
Press OK --> System Setup --> OK --> Paper Setup --> Select Default Paper Type --> Change to Heavy 111 - 130g
Go back one level and select Tray 1 and then tray 2 and change the same "Default Paper Type" to "Heavy 111-130g".
Above should fix the issue and stop the "Misprint" error popping up.
If it still prompting, then it could be a problem with the printer itself. If under warranty, you can call HP to get an engineer to come out and repair.
If out of warranty, you could also try to clean the printers pickup roller and paper paths:
For best result, use a Platenclene, Print roller cleaner and restorer and some absorbent dry wipe cloths. Unplug power cable and usb/network cables
REMOVE ALL TONER CARTRIDGES !!!
remove paper try
turn the printer 90 degrees upwards (so it is lying on it's back (side where the power cable goes)) so that you can see the underside of the printer.
Give your cloth a couple of pumps of the spray onto the cloth and as you look at the bottom area of the printer you will see a rubber roller, you may find quite a lot of paper fluff here, so clean as much as you can.. DO NOT try force roller to turn all the way round, just clean as much as you can, it should do the trick. Once finished turn the pritner over and re-insert the cartridges and power plugs/cables.
01-16-2016 02:00 AM
Thaank you KVR for the solution. We are having the same issue since two weeks and tried to reset but didnt help me. After i follow the steps you have given, our problem of MisPrint solve instantly.
Thanks alots and KUDOS to you :manvery-happy:
02-05-2016 07:31 AM
You have to change the settings when it starts cleaning every 5 min.
In System Tab and Paper Handling:
Default Paper Size: A4 or Letter
Default Paper Type: Heavy 111-130g
Manual Feed: Off
Tray 1 Size: Any Size
Tray 1 Type: Any Type
Tray 2 Size: A4 or Letter
Tray 2 Type: Heavy 111-130g
Tray 3 Size: A4 or Letter
Tray 3 Type: Heavy 111-130g
All paper handling settings as follows:
Note Tray 2 Heavy
Default Paper Size: Letter
Default Paper Type: Plain
Manual Feed: Off
Duplex: Off
Bind: Long Edge
Tray 1 Size: Any size
Tray 1 Type: Any Type
Tray 2 Size: Letter
Tray 2 Type: Heavy 111-130g
Paper Out Handling Specify Time and Action Paper Out Time: 0 Seconds
Paper Out Action: Override
- « Previous
- Next »
Didn't find what you were looking for? Ask the community