PSC 750 LCD panel has gone blank

[HershF]

My PSC 750 printer LCD has gone blank and no lights work, but the printer continues to print.  I've tried reseating the ribbon from the control panel and resetting the printer by pulling out the AC cord, waiting 30 seconds and plugging it back in.

Any other suggestions?

Thanks.

[Shane_R]

You can try doing a partial reset.  You can find the steps in this document next to the PSC 700 Series near the bottom.  If that doesn't work, the LCD and lights have just worn out, but if it still prints, I wouldn't worry about replacing it unless you can't scan anymore.

[HershF]

Thanks, I was going to try that next, but what are the odds that the LCD panel and all the lights on the Control Panel would go at once?  Sounds to me like something more central has gone.

Also, if I do this and I can't see the LCD, how will I know what options to accept?

[Shane_R]

That is a good point.  You should probably not do the partial just in case that doesn't fix the LCD.  There really isn't anything you can do.