Posts: 1
Member Since: ‎01-06-2014
Message 1 of 4 (1,087 Views)

Where can I get MIB for HP OfficeJet X476dw?

Where can I get MIB for HP OfficeJet X476dw?


I want to monitor the supplies levels, and I think I have found it at:


...but I need some help to understand the values, so that I can effectively monitor them.


Thank you.



Associate Professor
Posts: 1,434
Member Since: ‎07-08-2011
Message 2 of 4 (1,072 Views)

Re: Where can I get MIB for HP OfficeJet X476dw?

To find the MIB archive for HP Laserjet products:

1. Navigate to

2. Click the link for Appliance Printing Development Kit

3. Click the link for APDK Developer Kits

4. Change the Kit Area drop down box to LaserJet and Digital Sender

5. Navigate to LaserJet and Digital Sender > Printer Management > Printer Specific MIB's

6. Search through the posted MIB files and review the contents



OfficeJet printers are not normally disclosed directly on the HP website.  You might have to findwhatever is the closest laserjet model and go off of that one instead.  When in doubt start poking around at a high level and drill your way down until you find what you are looking for.  If you already know the OIDs then you may have to conduct some trial and error along with a custom script to determine exactly what is being reported.



My HP Enterprise Profile
My Verizon Wireless profile
If you found this post helpful then please award it a Kudo (purple thumbs up) or even better mark it as the solution : )
Posts: 17
Member Since: ‎12-03-2008
Message 3 of 4 (1,050 Views)

Re: Where can I get MIB for HP OfficeJet X476dw?

Search for rfc3805.  It contains the information that you need.  In that document you can find the meaning of the OIDs.


Your OID (I substituted in X and Y) will select the values as follows


X - a row in a MIB table - one for each supply

Y - a column in a table - these mean

    1 - Supplies index (unique ID)

    2 - Marker Index (associated PrintMarker subunit ID)

    3 - Colorant Index

    4 - Class  - see PrtMarkerSuppliesClassTC in the rfc (is this a supply that is consumed or a receptacle that is filled)

    5 - Type - see PrtMarkerSuppliesTypeTC in the rfc (toner, ink, etc.)

    6 - Description - see PrtLocalizedDescriptionStringTC

    7 - Supply Unit - see PrtMarkerSuppliesSupplyUnitTC (unit of measure for Max Capacity and Supplies Level)

    8 - Max Capacity - max value of level if supported, -1 means "other", -2 is unknown

    9 - Supplies Level - the remaining level/space (receptacle) if supported, -1 = other, -2 = unknown, -3 = some level/space remaining

I work for HP on Printer Connectivity Software. My posts are my own opinion.
Honor Student
Posts: 2
Member Since: ‎03-24-2015
Message 4 of 4 (678 Views)

Re: Where can I get MIB for HP OfficeJet X476dw?

Does anyone know where the specific OID's that relate to dot or pixel counting is? I've been told that it is in the new firmware?




† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation