04-06-2012 08:58 AM
For the HP Officejet Pro 8600 e-All-In-One Printer, can it enlarge/reduce the size of the original when making copies? Same for the 8600 Plus?
This question was solved. View Solution.
12-14-2012 12:22 PM
Select the Settings option:
* Scroll down to Resize
* Use the left/right arrows to scroll the resize options.
* Actual Size 100%
* Full Page 91%
* Fit to Page
* Custom Size
* Legal to Letter 72%
* Letter to A4 94%
* 2 on 1
Hope this helps.
08-28-2013 09:40 AM
HP Officejet Pro 8600 can enlarge copies.
Go to settings and select custom size and use the either the up or down arrow to select size.
Position item about 2 inches from the right edge of the screen.
I've used the enlarge capabilities to enlarge drawings for project plans. (100 to 175%)
08-29-2013 11:03 AM
Sorry, but on my machine when I press "Settings" then "Resize" I get an image of a page with "100%" at top, a "tick" in the centre, and "Actual Size" at bottom. Pressing "100%", the "tick" or "Actual Size" puts me back to Copy Settings!
08-29-2013 12:36 PM
Follow these steps to enlarge or reduce your copy size:
1 Select Copies
2 Select Settings scroll down to resize
3 On the resize screen touch the triangle at the right three times to reach the custom screen
4 Depress custom size -- a new screen will appear
5 You can now enter percentage to size the copy with either the 10key pad on the far right or
depress the up or down arrows on the main screen 1% at a time
6 place the original on flat copy surface new the right side of surface
7 now return to first screen and select copy black or color
09-20-2013 07:04 AM
Did anyone figure out how to get the scanner to allow the option to resize? as several have mentioned it is stuck at 100% and pressing the right triangle only goes back to the previous menu , thus not allowing the selection of anything other than 100%