Cannot copy or scan from ADF (autofeeder) on LaserJet 1536dnf MFP

[pcwizard]

Hi lgor0,

Please check your private messages.

[andrew_tgfza]

Good Day,

I seem to be suffering from a similar issue. When I scan or copy from the ADF, the ADF pulls the pages through and then fails.

When I scan, I get an error message "An error occurred while scanning" and when I copy, it scans the original then does nothing.

I have refreshed the firmware with the latest version and reset as many of the settings back to default to no avail.

[IgorO]

Yep, that's the same issue. Don't waste any time and get it serviced as soon as possible. Especially if it's still under warranty. How long ago did you buy it and how many pages did you get out of the auto feeder?

[andrew_tgfza]

I have managed to put 410 ADF scans through. Which, from what I have read, is par for the course.

[IgorO]

HP - I am so disappointed with you.

[pcwizard]

Hi

Follow the steps in the document below.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02713441

[andrew_tgfza]

Hi, This is not a mispick issue. The ADF feeds the originals through fine. It just doesn't do much after that. Scan give and error and the copier function does nothing.

[pcwizard]

Hi andrew_tgfza,

Please call our technical support at 800-474-6836 for this hardware issue. If you live outside the US/Canada Region please click the link below to get the support number for your region.

http://www.hp.com/cgi-bin/hpsupport/index.pl

[hansvy]

Igor,

I have exactly the same problem.  After owning the printer for about 1 year all of a sudden, the pages will feed through the ADF but won't scan.  I can still scan individual pages like you can.  Since getting the prineter, I scanned 1,155 total pages through the ADF and 524 on the flatbed, so I got an extra 500 pages more than you did .

There is a little hairline trigger type lever in the ADF that pushes to the side when you put the paper in the ADF.  My guess is that this lever signals to the printer that there is paper in the ADF and that the scanner should be activated.  I wonder if this is where the problem might be?  Somehow the scanner is not being activated via the ADF?

It is irritating when this happens because you can literaly spend hours and hours fiddling around with it with no success.

[IgorO]

Yes - I think the fix is probably simple but expensive considering it's out of warranty and I need to ship it to the repair center. I am considering just putting my money to a new Canon multiple-function instead of trying to get this one working again. Such a shame too since I thought it would last considerably longer.