04-26-2011 09:39 AM - edited 04-26-2011 10:19 AM
Three month old Deskjet 3050 was working great up until today. When I hit the scan button the power button immediately begins to blink and the error message reads " scan error try scan from computer". I have unplugged the power for several hours, plugged it back in, no change. Running Windows 7 Home Premium SP1. Thank You
Solved! View Solution.
Re: Deskjet 3050 scan error
04-26-2011 11:07 AM
Uninstalled/reinstalled the software, issue resolved Thank You
04-26-2011 10:38 AM - last edited on 04-18-2016 12:49 PM by OscarFuentes
Scan issue could be either a hardware issue related to the all in one, or a siftware related issue. We need to first check the hardware functionality of the all in one by performing a stand alone copy.
Please try the steps mentioned below.
- Turn on the Printer
- Verify that there are plain white papers loaded in the input tray.
- Place the original print side down on the right front corner of the glass.
- Press the Start Copy Black or Start Copy Color button to start a copy job.
Check the results.
If copying has issues, then please follow the steps in the link provided below.
If copying issue is resolved, then for scanning you need to uninstall and reinstall the printer software completely.
NOTE:- Though I am working for HP, my posts are my own.
04-26-2011 06:52 PM
This scanner problem is driving me 'Bananas'. One day it works and the next day not. I've tried 'paint' scanning and it worked yesterday and today not.. I need the scanning for important documents but this scanner problem is very bad. I need an answer. Should I reinstall the CD ...and do I uninstall the previuos on first?
01-31-2012 12:12 AM
I have no scan to my computer. It will scan and print the document just fine, but the computer insists that there is no scanner. I have uninstalled and reinstalled the software at least 5 times already and I still get the same issue. I hit the scan button on the printer and it times out. I run the Scan Diagnostic tool and it gets to HP Twain Scan and fails (after it fails at WIA). It offfers no fix button and tells me to uninstall and reinstall. This is unbelievable because last week the scan worked fine. The scan function is the only reason I bought this printer and if it doesn't work, then I have wasted my money. Any solutions other than uninstall and reinstall would be great. I am running Windows 7 (64-bit).
02-12-2012 10:15 AM
I tried all of the above, even the hp diagnotic utility, nothing worked. I found in services that "Shell Hardware Detection" was disabled. Set it to automatic start, start it and then start the windows image acquisition service and now everything is working!!!
02-14-2012 10:56 PM
I'm having a similar problem.
ive uninstaled and reinstalled my printer many times so far, i cant get it to connect to the scanner. not only that, but i cant get it to connect to a wireless netwrok either, just getting to connect wired is a pain!
im running windows 7, 64 bit home premium. everytime i try to get the scanner to work, i get an error message saying:scanner commmunication cannot be established!, ensure your product is powerd on ect.ect. and ive done everything it says, and ive googled this many many times and ive found nothing that has been able to help me. ive tried retessting the router, the printer, the modem. nothing. ive tried unistalling, reinstalling... nothing works!
ive disabled firewall, ive gone through the advanced settings, and tried disabling and enabling things, nothing.
ive done that Shell Hardware Detection thing aswell, and it didnt worl. it can print! but it wont scan. at all. ive followed all the suggestiong in here and it wont work.
also, my girlfriends computer works with the printer and scanner wirelessly without any problems(but i unofrtunatly broke it:/)
im not sure what ive done ring, this is frustrating, i have contracts to send!
any help i would LOVE
also, im sorry for the bad spelling, im in a rush is all:/
02-15-2012 08:33 AM
Do you know how to go in and turn the services on\off using the start\run\services.msc? Go in there and check the status Windows Image Acquisition (WIA) service, if its off start it. If if fails, then go to the shell hardware detection service and see if you can start that, once that is started go back and start the wia service and make sure they are set to automatic start.
- Testing Your HP Fax Machine with the HP Fax Test Service
- A Communication or Connection Error Displays When Scanning
- Scan Using Full Feature HP Software (Windows 10)
- HP Photosmart 7510, 7515, ENVY 110, 114 Printers - Restoring eFax Service
- HP All-in-One Products - A 'Scanner Failure' Message Displays on the All-in-One Control Panel and You Cannot Scan, Copy, or Fax