Question
Reply
Honor Student
Posts: 2
Member Since: ‎11-03-2008
Message 1 of 3 (462 Views)

Lan FAx whit RTE Fax parameters

 

hello,

 

what are the parameters to declare on the RTE Fax server for the HP DSS server work.

 

 

 

c00433124.pdf - Adobe Reader.jpg

 

dss.jpg

Reply
0
Tutor
Posts: 24
Member Since: ‎05-06-2013
Message 2 of 3 (437 Views)

Re: Lan FAx whit RTE Fax parameters

Joaquin -

 

Generally you need to do two things - 

1) Configure the fax sever to work with DSS

     - You need to configure a "watched" folder for the RTE fax server to look for jobs coming from DSS

     - There should be a configuration setting in RTE fax to set this up, if not, check their documentation

 

2) Configure the DSS software via the Configuration Utility to enable Lan Fax

     - Select the RTEFAX setting

     - Browse to the "watched" folder setup by RTE fax

     - Select if you want DSS to send the job notification (or let the fax server do it)

     - There are a few other settings in the DSS Cong Util, but keep them as is.

 

Give this a try.

Highlighted
Honor Student
Posts: 2
Member Since: ‎11-03-2008
Message 3 of 3 (432 Views)

Re: Lan FAx whit RTE Fax parameters

Hello and thank you for your help.

Under RTEFax it is specified an entry for faxing folder.

Another folder for confirmation and a last folder for errors.

On DSS4  it is possible to setup a single folder only.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation