Error 0xc18a0001

[stresssing]

I installed new drivers where they were bad, but it still shows: Ink system has failed. Unable to print. Refer to printer documentation. Error 0xc18a0001. Turn power off, then on again.

When I turn it off and on again, I get the same message. Is there any fix for this?

Thanks!

[Jann31]

Hi stresssing,

I've found this site with some solutions to fix your error:

http://fix-your-printer.blogspot.com/2008/11/error-hp-oxc18a0001.html

Good luck !

[134]

my printer have an error code plz help me error code oxc18a0001

[nohbanquet]

Please help me.

I'm useing HP Photosmart 3210a all-in-one printer.

This printer has error "0xc18a0001".

When I was changed the Black ink, this printer has trouble.  

What should I do?

[RobertoR]

Hope you a having a great day and very sorry to learn that you are havnig this issue.

I am reaching out to probe if you still experience this issue. If you are,  I will do my best to assist you.

This article will guide to the steps that will take care of this issue if the issue can be fix by troubleshooting

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en&product=1105178&tmp...

If you are not experiencing this issue any longer, I will appreciate if you can take I little bit of your time and let me know.

Hope this helps!

RobertoR
▼

[marianneagren]

---

134 wrote:

my printer have an error code plz help me error code oxc18a0001

---

[Wainwright]

The fix at

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en&product=1105178&tmp...

would not clear the HP error message 0xc18a0001 on my cherished HP printer D7460.

Simon

[Rudy1906 · Accepted solution]

Wainwright, you may need another print head with that error code message. I would contact HP Total Care (1800-474-6836) and check to see if your printer or printhead is in warranty, and it could be replaced.

Let me know if you have anymore questions.

[Wainwright]

A new print head from HP will cost more that a new printer as you well know. Strange then your motivation for suggesting it, as is you motivation for suggesting a warranty soloution, as you are probably also aware that these issues only occur out of warranty.   Never mind your 'helpfull' advice creates the illusion of concern at HP.

What I want to know is how to purge the ink system on this device.

Or is this error message just programmed failure?

[Rudy1906]

HP support has different options for printers and printheads. If eligible, you can get FREE print head or discounted price on another printer.

Also, this error message can be printhead failure, or it can be a sensor in the printer that has gone out. First you change the printhead and see if issue is resolved. If not, then it would be the printer needs replacing.