HP Support Forums
Join in the conversation.
12-29-2010 11:52 AM
push button then click icon
01-04-2011 05:32 AM
Did the wireless ever work on your nc6220? On many of these older models, the wireless cards were optional.
If you have an internal wireless card, when you push the wireless button on your notebook, you should see a blue light on the front of the notebook on the left side (where the other lights are) when the wireless card is turned on.
If you push the button and nothing happens it can be one of 4 things:
1. No wireless card is installed.
2. The card is turned off in the HP wireless manager software.
3. The wireless card is disabled in the BIOS, and you need to enable it.
4. The wireless card is broken, or there is other damage to the motherboard, wireless button, etc.
03-09-2012 01:04 PM
I have HP compaq nc6220 and "airplane mode" was turned on in Fedora OS. Now wireless is not working, not getting enabled by the hardware switch above keyboard. HP wireless assisstant declares it as "disabled" and not turned off. I think integrated wireless device is turned off somehow that is declared hardware enabled by default as per HP manual. Please show me a way out. I m stuck without my wireless connection.
Please reply me via email : email@example.com
03-09-2012 01:58 PM - edited 03-09-2012 02:00 PM
If you have the wireless assistant installed and the drivers installed, then I don't have an answer for you.
Check in the windows wireless management program that the card is turned off in there.
03-09-2012 02:18 PM
OK. finall alhamdulillah I found a solution. Here it is...
F*** Fedora, I have deleted its partition and uninstalled it, there is certainly a bug in it.
In Windows XP, I turned off my wireless by turning off from button above my laptop keyboard, then don't turn it on from the same place. I turned it on from "HP Wireless Assistant" and lo! integrated wireless device has come out of "airplane mode".
Ahhhhh... Long story but finally successful. Thanks Sir Paul anyways, at least you tried to figure it out.
03-09-2012 02:39 PM
You're very welcome.
Glad you got it sorted out.
A word to the wise...anytime you have the wireless assistant installed, and the hardware button turned on, you should always make sure the wireless card is on and working before wiping the hard drive and installing a different OS or reinstalling the same OS.
BTW, you can also run Windows 7 on the nc6220, but you would not have Aero. Everything else works fine.