11-15-2011 03:51 PM
I bought a HP Pavilion G6-1202eh notebook and i installed a Windows Vista(32bit). The device manager show that i have a Realtek RTL8101 network card, but in the driver list(on the HP website) i cant find this type only, the Realtek RTL8188CE.
What i should do in this situation?( im beginner in system installation-->it was my first windows install).
This question was solved. View Solution.
11-15-2011 04:32 PM
Go into Device Manager, right click on the Realtek device and select Properties. Click the Details tab, choose Hardware Ids from the dropdown box and post back with the details shown under Value.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Microsoft Windows Expert - Consumer
11-15-2011 07:27 PM
It sounds like you need the 8101 driver which you can download and install from the link below:
Download and install the 5th one on the list.
11-16-2011 04:57 AM
Thank you, the yellow label was disappeared.
But it still cant connect to the wifi, and the fn key isnt working, so the wifi led on the F12 key is red/orange. Any idea for this?
11-16-2011 12:59 PM
Yes, the network adapters driver is good.
But i find another yellow labels in device manager. There is a point int the list called other devices(this is my translation because my windows is hungarian), and there are 3 other option: Network controller, PCI device, SM buscontroller. They have yellow labels too.
What drivers should i download?
And othe problems: My touchpad switch on/off "button" is not working, and the scrolling with two finger on touchpad is also not working. And th Function key also not working(i switch it in setup menu enabled /disabled too)
11-16-2011 01:29 PM
Please click on each missing device in the device manager. Then click on the details tab.
In the Properties drop down list, select the second item (Hardware ID's).
Post the top string of characters you see. Those will identify the type and model of the devices you are missing and I can try and find drivers for them.
You wireless card won't turn on because that network controller is your wireless card that needs the driver. But there are several wireless cards your model can have, so I need the hardware ID code for it.
Try installing this quick launch buttons software and see if it gets some of those buttons to work.
11-18-2011 05:13 PM
Yes that is the correct answer I was looking for. You have an Atheros wireless adapter.
These drivers should work for it.