03-07-2017 06:01 PM
Welcome to HP Forums, this is a great place to get support, find answers and tips.
Thank you for posting your query, I'll be more than glad to help you.
I understand that you are unable to print pictures from your HP Sprocket Photo Printer as the blue barcode keeps.printing first.
This issue could be a hardware issue with the unit.
Let's go through a few steps to resolve this issue.
And here's the step by step guide for you in the link: http://hp.care/2fDYIuc
If the issue persists, then you may need to contact phone support for further assistance at the link: www.hp.com/contacthp
You have a good day ahead.
I am an HP Employee
Please click “Accept as Solution” on the post that solves your issue to help others find the same solution.
Click the “Thumbs Up” to say “Thanks” for helping!
03-22-2017 09:21 AM
Hello @rushla -
Are you using HP brand ZINK paper, or another 3rd party brand? If the latter, this can occur when scanning a non-HP smartsheet.
Have you tried printing without the smartsheet loaded?
Alternatively, you may want to update your Sprocket firmware and try again.
Once you have a connection via the Sprocket app, please do the following to update the firmware:
1.) Make sure your Sprocket battery is charged greater than 75%, otherwise you won’t see the firmware update option.
2.) Ensure your Sprocket is powered on and connected to your phone/sprocket app (green circle in menu)
3.) In the Sprocket mobile app, tap ‘menu’ (3 lines) -> ‘sprocket’ -> ‘Printers’ -> ‘Get Firmware Upgrade’ (blue text)
Thanks and sprocket on!
The comments above represent myself and do not reflect the opinions of HP.
If my post was helpful, please click the 'thumbs up' icon below to give Kudos. Thanks!!!
03-23-2017 01:31 AM
you can try resetting device using following instruction.
This should solve your problem!
1. Locate the reset button near the charging port.
2. Gently insert a straight pin into the reset button access point, and then press the reset button for 3 seconds. The printer resets and any previously illuminated LED’s turn off.
3. Turn on the printer by pressing and holding the power button until the white LED illuminates
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos!" which is on the left. Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue