Post new question
Question
Reply
 
Honor Student
Posts: 3
Member Since: ‎04-07-2017
Message 1 of 5 (306 Views)

David5 SLS3 Stereo calibration at 30mm

Product Name: David5
Operating System: Microsoft Windows 10 (64-bit)

Howdy all - just got a brand new David5 / SLS3 stereo setup.  We haven't been able to successfully calibrate with stereo cameras on the 30mm calibraiton pattern.  We can do the other patterns just fine, but can't seem to successfully get the 30mm calibration targets well enough in view for both cameras, even when the cameras are right up against the projector on the rail.  Are there any tips for making that work?  

Reply
0
Teacher
Posts: 81
Member Since: ‎10-31-2016
Message 2 of 5 (288 Views)

Re: David5 SLS3 Stereo calibration at 30mm

Try to use negative corner. I have more success with negative corner and 30mm scale. I am not sure how it´s going with two cams.

I am an HP Employee

**Views expressed are my own, no one else would say such drivel**
Honor Student
Posts: 3
Member Since: ‎04-07-2017
Message 3 of 5 (279 Views)

Re: David5 SLS3 Stereo calibration at 30mm

We can't seem to make it work with the dual cameras on a negative corner. It actually seems even worse than positive.
Tutor
Posts: 22
Member Since: ‎10-27-2016
Message 4 of 5 (237 Views)

Re: David5 SLS3 Stereo calibration at 30mm

Sometimes I use the calibration pattern turned 90degree, so that one glassplate lies on the table. Maybe that works better for you? At which horizontal angle are the cameras set?

Honor Student
Posts: 3
Member Since: ‎04-07-2017
Message 5 of 5 (228 Views)

Re: David5 SLS3 Stereo calibration at 30mm

That's an interesting idea - I'll give that a shot.

 

We've tried a variety of horizontal angles.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation