Elitebook 745 G5 connect to Apple Thunderbolt Display using adapter Type c to Mini Display Port

[Tavolio]

I am trying to use my Laptop HP to connect to a Thunderbolt display 27" screen, I purchase a USB Type c (compatible with Thunderbolt 3 Protocol on Mac) connector to Mini display port,  I tested on a MacMini and the adapter works fine, but, on my HP, does not turn on the display and does not recognice it, I tried to look for drivers or any SW that can do the trick, but I did not find nothing, Thanks for any feedback on this matter

[banhien]

@Tavolio 

Machine should have following ports

(1) USB Type-C (Alt Mode)

(1) USB 3.1 Gen 1

(1) USB Type-C (Charging)

(1) HDMI 2.0

(1) VGA port

(1) RJ-45/Ethernet port

(1) Headphone/microphone combo jack

(1) AC power port

You can only connect  USB Type-C (Alt Mode) to a monitor. It is the port on the right side, next to the power connector port.

Regards

[Tavolio]

Yes, has the port on the right side and yes is an USB type with charge has a lightning icon, I tested with two different adapters and none works, 

[Tavolio]

Also is a Thunderbolt 2 adapter si is from usb c to thunderbolt 2

[banhien]

@Tavolio 

Your monitor has Thunderbolt port, have you try direct thunderbolt cable from computer to monitor. Do not use middle man

Regards.

[Tavolio]

The computer does not have a thunderbolt port... the laptop, only display port, usb, HDMI (I tried to connect it to the monitor using a cable HDMI to Thunderbolt), usb A