cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Serhii-Lema
New member
2 1 0 0
Message 1 of 2
325
Flag Post

HP EliteBook 850 G7 Notebook - How I can enable HP Coolsense on Linuxmint ?

HP Recommended
HP EliteBook 850 G7 Notebook PC IDS Base Model
Linux

Hello guys!

I have problem with Enable HP Coolsense on Linuxmint .

I tried to to it as in this video https://www.youtube.com/watch?v=tbqNoJ9-IoQ , and this url http://tuxtweaks.com/2008/08/how-to-control-fan-speeds-in-ubuntu/ , but I get error

 

 

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

 

 

There are my outputs:

sensors

 

$ sensors
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +27.0°C  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +33.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +32.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +32.0°C  (high = +100.0°C, crit = +100.0°C)
Core 2:        +31.0°C  (high = +100.0°C, crit = +100.0°C)
Core 3:        +32.0°C  (high = +100.0°C, crit = +100.0°C)

BAT0-acpi-0
Adapter: ACPI interface
in0:          12.54 V  
curr1:            N/A  

pch_cannonlake-virtual-0
Adapter: Virtual device
temp1:        +32.0°C  

nvme-pci-6b00
Adapter: PCI adapter
Composite:    +23.9°C  (low  = -273.1°C, high = +84.8°C)
                       (crit = +89.8°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +32.0°C  (crit = +128.0°C)
temp2:        +25.0°C  (crit = +128.0°C)
temp3:        +30.0°C  (crit = +128.0°C)
temp4:        +29.0°C  (crit = +128.0°C)
temp5:        +26.0°C  (crit = +128.0°C)
temp6:        +27.0°C  (crit = +128.0°C)

 

sudo /usr/sbin/fancontrol &

 

$ Loading configuration from /etc/fancontrol ...
Error: Can't read configuration file

 

Output for inxi -Fxz is

 

System:
  Kernel: 5.10.0-1055-oem x86_64 bits: 64 compiler: N/A 
  Desktop: Cinnamon 5.2.7 Distro: Linux Mint 20.3 Una 
  base: Ubuntu 20.04 focal 
Machine:
  Type: Laptop System: HP product: HP EliteBook 850 G7 Notebook PC v: N/A 
  serial: <filter> 
  Mobo: HP model: 8724 v: KBC Version 06.37.00 serial: <filter> UEFI: HP 
  v: S73 Ver. 01.03.02 date: 11/04/2020 
Battery:
  ID-1: BAT0 charge: 54.3 Wh condition: 54.3/56.3 Wh (97%) 
  model: Hewlett-Packard Primary status: Full 
CPU:
  Topology: Quad Core model: Intel Core i7-10610U bits: 64 type: MT MCP 
  arch: Kaby Lake rev: C L2 cache: 8192 KiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx 
  bogomips: 36799 
  Speed: 900 MHz min/max: 400/4900 MHz Core speeds (MHz): 1: 900 2: 900 
  3: 900 4: 900 5: 900 6: 900 7: 900 8: 900 
Graphics:
  Device-1: Intel UHD Graphics vendor: Hewlett-Packard driver: i915 
  v: kernel bus ID: 00:02.0 
  Display: server: X.Org 1.20.13 driver: modesetting unloaded: fbdev,vesa 
  resolution: 1920x1080~60Hz 
  OpenGL: renderer: Mesa Intel UHD Graphics (CML GT2) v: 4.6 Mesa 21.0.3 
  direct render: Yes 
Audio:
  Device-1: Intel vendor: Hewlett-Packard driver: sof-audio-pci 
  bus ID: 00:1f.3 
  Sound Server: ALSA v: k5.10.0-1055-oem 
Network:
  Device-1: Intel Wireless-AC 9462 driver: iwlwifi v: kernel port: 3000 
  bus ID: 00:14.3 
  IF: wlp0s20f3 state: up mac: <filter> 
  IF-ID-1: docker0 state: down mac: <filter> 
  IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
Drives:
  Local Storage: total: 931.51 GiB used: 104.69 GiB (11.2%) 
  ID-1: /dev/nvme0n1 vendor: Kingston model: SNVS1000G size: 931.51 GiB 
Partition:
  ID-1: / size: 95.12 GiB used: 51.27 GiB (53.9%) fs: ext4 
  dev: /dev/nvme0n1p2 
  ID-2: /home size: 553.41 GiB used: 11.22 GiB (2.0%) fs: ext4 
  dev: /dev/nvme0n1p3 
Sensors:
  System Temperatures: cpu: 35.0 C mobo: 25.0 C 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 360 Uptime: 16m Memory: 31.02 GiB used: 20.24 GiB (65.3%) 
  Init: systemd runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17 
  inxi: 3.0.38 

 

 

Could you help me with it please?

 

Regards,

Serhii

1 REPLY 1
Serhii-Lema
Author
New member
2 1 0 0
Message 2 of 2
Flag Post
HP Recommended

Top

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation