cancel
Showing results for 
Search instead for 
Did you mean: 
Chirayu1988
New member
1 0 0 0
Message 1 of 3
374
Flag Post

How to use Dual OS on y HP Zbook workstation 15v G5?

HP Recommended
ZBook 15v
Microsoft Windows 10 (64-bit)

I want have installed ubuntu OS on my HP Zbook 15v G5 Workstation, but on reboot, by default windows 10 Pro starts

2 REPLIES 2
IT_WinSec
Level 15
Level 15
10,021 9,918 802 3,894
Message 2 of 3
Flag Post
HP Recommended

Hello @Chirayu1988 

 

Welcome !

 

  • Were you able to boot Ubuntu just once, at least once ?
  • Are you positive it has been successfully installed ?
  • Which OS you installed first and which second ?
    Windows installation overwrites the boot record instead of updating it. So older OS options are no longer available.

    Best option is to first install Windows, and then install Ubuntu. During the last phase of the ubuntu install, the grub boot utility will typically detect the Windows OS on the other partition and add it to the boot menu.

 

In order to change the boot order now (temporary) :

  • Try pressing Esc button repeatedly on start up to load HP Start up menu, like shown here >> https://www.youtube.com/watch?v=GSN0qzXayUY
  • Press/choose F9 button and make sure you select the Ubuntu partition using the keyboard and ENTER ?
  • Does Ubuntu load ?

 

If anything Ubuntu related is present in the list of F9 boot options but Ubuntu fails to load, try repairing GRUB2. Here are details >> https://www.howtogeek.com/114884/how-to-repair-grub2-when-ubuntu-wont-boot/

 

 

>> Your FEEDBACK is important. Click below on Accept As Solution or ThumbUp+ buttons if my comments helped or to say thanks <<
*** I work for HP *** I express personal opinion only *** HP Expert - Volunteer since 2013
HP Laptops On Amazon - https://amzn.to/3wboBVLHP Spectre x360 - https://amzn.to/3dCflTZPLEASE SUBSCRIBE IF THIS HELPS YOU - IT HELPS ME :-)Here is a very qui...
0 Kudos
IT_WinSec
Level 15
Level 15
10,021 9,918 802 3,894
Message 3 of 3
Flag Post
HP Recommended

You may configure boot options by entering the BIOS/UEFI with Esc/F10

Then go to Advanced tab -> Boot options

 

SAM_4556.JPGSAM_4558.JPGSAM_4559.JPG

>> Your FEEDBACK is important. Click below on Accept As Solution or ThumbUp+ buttons if my comments helped or to say thanks <<
*** I work for HP *** I express personal opinion only *** HP Expert - Volunteer since 2013
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation