My laptop stucks on windows startup logo

[Pal9273]

My laptop stucks on windows logo when I start it even that circle does not revolve and it also stuck. Before 2 days that blue screen error occurred and I reinstalled its window and everything started going well. But today that error again occurred and now my laptop is unable to start and is just freezed. I have taken memory and hard drive tests they were passed. It is not starting even in safe mode. 

[KrazyToad]

@Pal9273

Welcome to HP Community

I have gone through your Post and would like to help

May I know how did you reinstall Windows?

Try running an Extensive System Test to confirm the Hardware Functionality

- Shut down the Notebook completely
- Turn it back on, then tap the Esc key repeatedly until the Startup menu screen is displayed.
- Press F2 to select System Diagnostics.
- Click System Tests, then click Extensive Test.

I suggest you perform a System Recovery

- Turn off the computer.Disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes.
- Turn on the computer and repeatedly press the F11 key about once every second until the Choose an option screen is displayed, and then continue.
- On the Choose an Option screen, click Troubleshoot.
- On the Troubleshoot screen, click Recovery Manager.
- Under Help, click System Recovery.
- When Recovery Manager prompts you to back up your files, select a backup option:
- The Welcome to HP Recovery Manager screen is displayed. Read the on-screen information, and then disconnect any connected devices and cables, such as Personal Media Drives, USB drives, printers, and faxes.
- Remove media from internal drives, and remove any recently added internal hardware.
- Click Next to continue.
- When recovery preparation is complete, click Continue to proceed to the installation phase of the recovery process. The computer restarts several times during the recovery. This is normal. Do not close, shut down, or disconnect the computer while HP Recovery runs.
- Recovery Manager reformats the Windows partition and reinstalls the original software.
- After the system recovery is complete, click Finish to restart the computer. Complete the setup screens and wait until the computer finishes the setup.
- Once the setup is complete, turn off the computer, reconnect all devices and cables, and then turn on the computer.
- Before using the computer, update and protect your computer by reinstalling any virus and security software that was installed before the system recovery.
- Reinstall any software programs that were added after purchasing the computer, as well as any files that were backed up.
 

Keep me posted

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on the Public Post and it will also help other community members with similar issue.