Over heating & Battery life

[aa_p]

I just bought hp 14cf1001ne recently. After the first full charge, the battery drained within almost 6 and half hours by being idle. In the specification, it says 12.5 hours.

And the machine's bottom and Charging Adapter also become over heat. 

[Echo_Lake]

@aa_p
Thank you for posting on the HP Support Community.

Don't worry as I'll be glad to help,  I have a few troubleshooting steps we could try to fix the issue:  

Hard Reset: Follow steps from the link: https://hp.care/2GnkMa8. (do not skip any troubleshooting steps even if you feel steps are repeating)

BIOS default: 

1. Turn off the computer and wait five seconds.
2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4. Press F10 to Save and Exit.
5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6. Follow the prompts to restart your computer and follow the next steps.

Perform Windows Update and HP Support Assistant: 

To check for updates now, select the Start button, and then go to Settings  > Update & security  > Windows Update, and select Check for updates.

Install updates from HP Support Assistant: Go to Download HP Support Assistant to install the tool.

1. To open the HP Support Assistant, double-click the HP Support Assistant icon .
2. Click My devices in the top menu, and then click Updates in the My PC or My notebook pane.
3. Click Check for updates and messages to scan for new updates.
4. Review the list of updates. Updates with a yellow information icon are recommended. Updates with a blue information icon are optional.
5. Click the update name for a description, version number, and file size.
6. Select the box next to any updates you want to install, and then click Download and install.

And, also run BIOS Update: Follow steps from the link: https://support.hp.com/in-en/document/c00042629

Also, run a hardware diagnostics test on battery and Charger:

Use the following steps to open the Component Tests menu.

1. Hold the power button for at least five seconds to turn off the computer.
2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
3. On the main menu, click Component Tests.
4. The Component Tests menu displays. Your Component Tests menu might be different, depending on the components installed on your computer.
5. To run both tests simultaneously, in the Component Tests menu, click Power Source, and then click Run once. Each component can also be tested individually.

AC Adapter Test:

The AC Adapter test provides an interactive test to determine if the AC power adapter is functioning properly. A good battery is required for this test. Before running the AC Adapter Test, HP recommends verifying that your computer can receive power by connecting a known working AC adapter.

Follow these steps to perform the AC Adapter Test.

• In the Component Tests menu, click Power, and then click an AC Adapter Test.
• Click Run once.
• The AC Adapter Test begins.
• When the test is complete, the results are displayed on the screen.

Battery Test:

Follow these steps to perform the Battery Test:

1. In the Component Tests menu, click Power, and then click Battery.
2. Click Run once. The Battery Test begins.
3. When the battery test is complete, the results are displayed on the screen. For additional battery information, click Battery Details.

If the test passes, continue with these steps:

• 1. Go to Start, search for Device Manager, and open this result.
• 2. Expand batteries.
• 3. Right-click on the ACPI option (usually the 2nd option) and select delete or uninstall. Follow the prompts.
• 4. Shut down the computer. 
• 5. Disconnect the charger.
• 6. Remove the battery.
• 7. Hold down the power button for 1 minute.
• 8. Insert the battery only.
• 9. Attempt to turn the battery on.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.